Screw to assist in the replacement of brass valves on Majoni and Dan Fender buoys and fenders.
Instructions
If your Dan Fender buoy is leaking or the valve was accidentally pushed inside the fender, then a new valve can easily be installed.
- Remove the faulty valve: Screw a 3mm screw inside the centre of the valve and pull it out with pliers (or a similar tool).
- Install a new valve: Gently push a new valve into position using a screwdriver or 3mm screw.
- Inflate the buoy or fender again.
Part Number |
---|
TBW-DFSCREW |