CRC High Strength Contact Adhesive Spray - 550ml
- Spray an even layer of adhesive to both surfaces.
- Adjust nozzle for width of spray required.
- Allow solvents to evaporate away. Between 5-10 minutes, the solvent should have evaporated and the adhesive should be ‘tacky’ enough to bond the surfaces together.
- A useful indication is to touch the surfaces (all over) with a clean finger: if they are ‘sticky’ to the touch, without transferring to your finger, they are ready to bond together.
- On non porous surfaces it is imperative that no solvent is trapped.
- Position components accurately, as when contact is made, the bond will be immediate.
- Apply maximum overall instant pressure, taking care to expel any air bubbles, to ensure a complete bond.
- Use of a hand pressure roller, e.g. a vinyl-flooring roller, provides good direct pressure.
- A dry adhesive surface may be reactivated by wiping over with solvent
Part Number | Pack Size | Size |
---|---|---|
CRC-324300 | 1 | 550ml |
CRC-324300-6 | 6 | 550ml |