Altex Epoxy Primer Base PART A
Part A only
ltex Yacht & Boat Epoxy Primer provides the foundation for all high performance marine systems. Altex Epoxy Primer is suitable for a vast range of substrates, and ensures exceptional adhesion for all coating systems to build on.
Altex Epoxy Primer is recommended for use as:
- Primer on suitably prepared steel, alloy, GRP and wooden substrates
- Multi-coat primer and self-build system
- Primer and seal coat for Altex Epoxy fairing systems
Altex Epoxy Primer may also be used to seal off prepared, aged coatings prior to repainting - refer also to Altex Epoxy Barrier Undercoat.
Altex Epoxy Primer is ideal for use below the water-line as a tie coat between aged epoxies and Altex Yacht & Boat Antifoulings-
- No.5 Ablative
- Sea~Zone® 60
- Pettit Vivid®
- Pettit Hydrocoat®
Features
- Excellent adhesion to a wide variety of substrates
- Mild Steel, Corten steel
- Aluminium
- Stainless Steel, Brass, Bronze and Lead
- Sealed timber, Fibreglass, Epoxy resin
- Gelcoat, Carbon fibre
- Sealed ferro-cement
- Formulated for use above and below water - simplifies full hull painting projects
- Very long mixed pot life
- Excellent long term re-coat and overcoating properties
- Very rapid dust-free and touch dry times
- Excellent anti-corrosive properties
Ideal for fairing systems – to apply fairing compound onto and for the sealing of completed, sanded fairing systems
Part Number | Size |
---|---|
ATX-EPB010 | 1 Litre |
ATX-EPB040 | 4 Litre |
ATX-EPB080 | 8 Litre |