Butyl Sealing Tape White - 10m x 20mm Roll

10m rolls of white Butyl tape. In the marine industry butyl is often used for bedding in deck fittings, portlights & hatches on boats. Also popular with caravan/RV manufacturers to bed in windows and hatches. 

Self-fusing Butyl Tape is used in many applications. The advantage of using butyl rubber in an adhesive format is that it is malleable and impermeable to air and water. It is hard wearing, can be applied to a wide variety of carrier surfaces and is able to be easily applied, thus giving instant results. 

Used in many industries from providing waterproof joining solutions for synthetic turf and water sealing tarpaulins for dams and pond liners, to waterproofing and joining applications for piping, roof flashing, corrugated iron and shower bases. A synthetic rubber, or elastomer, butyl rubber is impermeable to air and used in many applications requiring an airtight rubber seal.

• Pressure Sensitive Adhesive - Easily applied, no pre-heating or primer, no special installation equipment required.
• A Non-hardening Mastic - Butyl forms a soft resilient compression seal. Allows movement due to expansion/contraction. Butyl will not crack and has a virtually unlimited storage life.
• Forms an Immediate Bond - No curing time and no solvent evaporation. Butyl will fuse with nearly any stable solid surface including many low surface energy materials e.g. PE. Can be applied between 5° C and 40° C
• Supplied in a Roll - Quick, clean and accurate to install Butyl with a constant coating thickness.
• Visco-Elastic - If Butyl bonds are broken it will re-adhere to itself on contact (self-healing). Absorbs vibrations.
• Resists Water Vapour Transmission - Butyl is ideal for permanent waterproof seals.
• Chemically Inert - Butyl is safe to use and environmentally friendly. Butyl is resistant to alkalis, acids and salts. Butyl is resistant to oxidation and has good UV resistance.
• Retains Elasticity - Versatility of use for all climates and conditions: -30° to 120° C (short term)

PLEASE NOTE: Not recommended for putting over any silicon sealant, clean silicon sealant away thoroughly before using Butyl Tape