Electrical Connectors & Terminals

Victron VE.Can to CAN-bus BMS Cable - TYPE B Use these VE.Can to CAN-bus cables to connect a CAN-bus enabled battery to a GX device - Type B Battery Brands typically for Type B: LG Chem Resu AXIstorage BMZ Pylontech Part...

Victron VE.Can to CAN-bus BMS Cable - TYPE A Use these VE.Can to CAN-bus cables to connect a BYD B-Box battery (Type A) to a Victron Color Control, Cerbo or Venus GX. Part Number Meters VIC-ASS030710018 1...

Victron VE.Can RJ45 Terminator - Bag of 2 Sold as a pack of 2, these VE.Can RJ45 terminators are required for VE.Can networks. Part Number VIC-ASS030700000

Victron RS485 to USB Interface Cable Part Number Meters VIC-ASS030572018 1.8m VIC-ASS030572050 5m

Victron Male to Female 3 pole - Bag of 2 Part Number Meters VIC-ASS030560100 1m VIC-ASS030560200 2m VIC-ASS030560300 3m VIC-ASS030560500 5m

Victron VE.Direct TX Digital Output Cable (PWM light dimming cable) The VE.Direct TX digital output cable can be used in combination with the BlueSolar and SmartSolar MPPT chargers. It supports the following applications: - Solar lighting...

Victron Skylla-i Remote On-Off Cable Use this cable to connect a Skylla-i to a VE.Bus BMS. The VE.Bus BMS will then disable the Skylla-i charger when the batteries are fully charged. Part Number VIC-ASS030550400

Victron VE.Direct Non Inverting Remote On-Off Cable Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models. Note that it's not necessary to use this cable on the larger SmartSolar models, as they feature an...

Victron Inverting Remote On-Off Cable The Inverting remote on-off cable is intended for products which require active pull down of the remote control terminal to switch on, while the source signal turns high when switch on is required. The load output...

Victron CANUSB interface Victron Miscellaneous - Cables - CANUSB interface Part Number VIC-ASS030532010

Victron VE.Direct Cable - One Side Right Angle conn The VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model.  VE.Direct ports are included on the following products: Colour Control GX; Battery Monitors...

Victron VE.Direct to USB interface The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a...

Victron VE.Direct to RS232 interface Victron Miscellaneous - Cables - VE.Direct to RS232 interface Part Number VIC-ASS030520500

Victron VE.Direct to VE.Can interface The VE.Direct to VE.CAN interface connects products with a VE.Direct connection to products with a VE.Can connection, so the products can communicate with each other. Part...

Victron VE.Direct to NMEA2000 interface This NMEA2000 drop cable makes the BMV-700 information available to an NMEA2000 networks. Battery information such as voltage, current and state of charge can be displayed on common purpose displays from other...

Victron VE.Can to NMEA2000 Micro-C male VE.Can to NMEA2000 cable. This is used for connecting VE.Can solar regulators or a Color Control and other GX Devices to a NMEA2000 network. Part Number VIC-ASS030520200

Victron VE.Bus to NMEA2000 interface This NMEA 2000 drop cable connects a VE.Bus product, for example a Multi or Quattro, to a NMEA 2000 network. It transmits monitoring information, AC voltages and currents, DC voltages and currents and the state...

Victron VE.Bus BMS to BMS 12-200 alternator Victron Batteries - Lithium batteries - VE.Bus BMS to BMS 12-200 alternator control cable With this alternator control cable, the charge control feature of the BMS 12/200 can be used together with...

Victron RS232 to USB converter Victron Miscellaneous - Cables - RS232 to USB converter Part Number VIC-ASS030200000

Victron RJ12 UTP Cable 30m Victron RJ12 UTP Cable 30m used for connecting a BMV to a BMV shunt. Part Number Meters VIC-ASS030066003 0.3m VIC-ASS030066009 0.9m VIC-ASS030066018 1...