-
KUS Gauges
KUS Water Temperature Sender
Manufactured by KUS, this range of water temperature sender units are compatible with most brands of temperature gauges. Available with a range of threads to suit different housings, these brass temperature sensors will operate up to a maximum of...
-
Sam Allen
Waste Tank Senders - 1-1/4" BSP, 240-30 Ohms
Waste tank sender unit with a 1-1/4" BSP thread, 250mm long. 240-30 OHMS 316G stainless steel Rubber gasket and stainless steel screws included Part numberLengthOhms SAW-42525 250mm 240-30
-
Sensotex Gauges
Tank Senders - Stainless Steel, 1-1/4" BSP 0-180 Ohm
These Sensotex senders fit a 1-1/4" BSP thread and change resistance between 0-180 Ohms. Two lengths are available and a rubber gasket is included. Note that length is measured from the underside of the flange to the base of the shaft. Part...
-
KUS Gauges
KUS Stainless Steel Tank Sender - 1-1/4" BSP, 240-33 Ohm
KUS senders fit a 1-1/4" BSP thread and change resistance between 240-33 Ohms. Multiple lengths are available and a rubber gasket is included. Suitable for fuel (petrol, ethanol blend or diesel), fresh water, waste water, live well, oil, grey...
-
Nylon 5 Hole To 1-1/4" BSP Adapter Kit
This nylon adapter fits in the holes used by a 5 hole sender and allows a 1-1/4" BSP screw-in sender to be used. It can also be added to a hole to allow a sender to be fitted.
-
Alloy Tank Sender Adapter
Alloy weld-on or screw-in adapter for tanks with 5 holes tapped with a metric thread. The holes do not go all the way through. This sender adapter converts tanks with 5-hole fittings for 1-1/4" BSP senders.
-
Stainless Steel Weld-In Adapter Bush 1-1/4" BSP
Sender unit adapter made from stainless steel. This weld-in bush suits 1-1/4" BSP thread senders.
-
KUS Gauges
Kus Tank Senders - Stainless Steel, 5 Hole 240-33 Ohms
Utilising a magnetic field to control the reed on-off switch, the sender features a long service life and protection against vibration. Compatible with Fuel Gauges with a 240-33 Ohms resistance. 5 SAE standard holes. 316G stainless steel main body...
-
Sender Resistance Exchanger
This resistance exchanger allows 0-190 ohm senders to be used with 240-33 ohm gauges. It also allows 240-33 ohm senders to be used with 0-190 ohm gauges. The top and bottom points can be adjusted. Runs off both 12V and 24V. Part...
-
Waste Tank Senders - 6 Hole, 240-30 Ohms
6 Hole Waste Senders - 240-30 OHMS. 316G stainless steel. Rubber gasket and stainless steel screws included. Also includes a spout for a hose wash connection. Part...
-
6 Hole To 1-1/4" BSP Adaptor Kit - Stainless Steel
Stainless steel topside/underside adapter kit for tanks to suit 1-/4 BSP senders. The six holes are tapped to suit the screws provided. Rubber gasket and stainless steel screws included. This fitting has a top plate and a bottom plate (horse shoe...
-
Stainless Steel Fixing Kit - 6 Hole Senders
Stainless Steel Fit Kit 6 Hole suits Waste Sender Rubber gasket and stainless steel screws included. PART NO. 40130 Note: Sensotex Replacement Nylon fixing kit Part numberDescriptionN/AN/A SAW-40130 Stainless Steel Fit Kit 6 Hole suits Waste...
-
Rudder Angle Sensor
This sensor can be connected to a rudder angle gauge to show the angle of the rudder. Use the dual sensor when two gauges will be connected to one sensor, such as in a boat with two steering stations. Part...