Waste & Fresh Water Tanks

Vetus Connection Kit Waste Water Tank The installation kit consists of: 2 securing straps 1 inspection lid 1 fey for angel fittings Excludes exhaust tube Specifications Overall diameter 15.6cm Cut out diameter 11.5cm Part...

Vetus Rigid Waste Water Tank, Including Connections 25L, 40L, 60L & 80L Save time on your 'black tank' installation with the VETUS Rigid Waste Water Tank, which is supplied with the following connections: Fixed hose connector 19mm diameter...

Can-SB Waste Tank Pick Up Part Number SAW-45265

Waste Holding Tanks made from polypropylene. Roto-moulded in 5mm minimum thickness polypropylene, suitable for grey or black waste. Nine plumbing connection ports all 1½" BSP threaded. The 132210 and 132212 macerator toilet pump (refer...

Water Holding Tanks made with blue plastic. Roto moulded in 5mm minimum thickness polypropylene, suitable for drinking water. Nine plumbing connection ports all utilising 1½" BSP threads. Tanks are supplied with all ports blank except the top...

Waste Holding Tanks made in Italy by Can SB.  These wast tanks are the perfect solution for holding tanks on smaller boats and converts existing overboard discharge units. Suitable for Grey or Black Waste. Made from high density...

Nuova Rade flexible water tanks can solve the problem of storing water on your boat as they are strong and flexible and can be fitted into compartments where it would be impossible to install a rigid tank. These flexible tanks have a strong single layer...

These Plastimo flexible water tanks are strong and reliable and a practical low cost solution to fresh water storage on board. They are flexible, lightweight and form-fitting and so can be installed in compartments where it would not be possible to fit...

Nuova Rade flexible water tanks can solve the problem of storing water on your boat as they are strong and flexible and can be fitted into compartments where it would be impossible to install a rigid tank. These flexible tanks have a strong single layer...

These “Diablo” tanks by Nuova Rade are made from high density polyethylene material which can be used as tanks for petrol, ethanol mix, diesel, drinking water and waste - the same tank can be used for any of the above - they are non-toxic and...

CAN-SB 100Ltr Flexible Water Tank - Triangle Flexible water tanks are quick and easy to install in almost any space and available in triangular or square configuration. Made from strong Elastomer Thermoplastic, the flange is complete with all connections...

CAN-SB 55Ltr Flexible Water Tank - Triangle Flexible water tanks are quick and easy to install in almost any space and available in triangular or square configuration. Made from strong Elastomer Thermoplastic, the flange is complete with all connections...

CAN-SB 120 litre Flexible Water Tank. Flexible water tanks are quick and easy to install in almost any space and available in triangular, rectangular or square configuration. Made from strong Elastomer Thermoplastic, the flange is complete with all...

CAN-SB 100Ltr Flexible Water Tank. Flexible water tanks are quick and easy to install in almost any space and available in triangular, rectangular or square configuration. Made from strong Elastomer Thermoplastic, the flange is complete with all...

CAN-SB water tank complete with inspection porthole and fittings. Available in several sizes to suit drinking water tank requirements on many boats. Part numberCapacityLengthWidthHeight SAW-45280 32...

CAN-SB Water Tank Port Hole And Fittings Inspection porthole, for water tanks, complete with cap, vent and N1 terminal for rubber hose. Part number SAW-45279

CAN-SB 38mm Straight Water Tank Fitting. Straight through-hull fitting with 1 1/2" thread, 38 mm with locknut. Part numberThread SAW-45278 1-1/2"

CAN-SB 38mm 90 Degree Fitting Kit For Can-SB tanks. 90-degree through-hull fitting with 1-1/2" thread. 38mm with locknut. Part numberThread SAW-45277 1-1/2"

CAN-SB 60 litre Flexible Water Tank. Flexible water tanks are quick and easy to install in almost any space and available in triangular, rectangular or square configuration. Made from strong Elastomer Thermoplastic, the flange is complete with all...

90-degree hose connector with 3/8"thread, 12mm with locknut. Part numberDescriptionN/AN/A SAW-45276 CAN-SB 3/8 & 12mm Fitting Kit For Water Tank - -