Water Heaters & Accessories

ATI Water Heater Pressure Relief Valve Replacement Pressure Relief Valve for ATI boilers KPA: 500 Part Number SAW-44292

RCM Dual Heating Water Heater Stainless Steel - 22 Litre. Incoloy Electric Element and Heat Exchanger Coil. Incoloy* Electrical Heating Element is available in 1250 Watts allowing hot water production when engine heat is not available. Heat...

RCM Dual Heating Water Heater Stainless Steel - 45 Litre. Incoloy Electric Element and Heat Exchanger Coil. Incoloy* Electrical Heating Element is available in 1250 Watts allowing hot water production when engine heat is not available. Heat...

RCM Dual Heating Water Heater Stainless Steel - 30 Litre. Incoloy Electric Element and Heat Exchanger Coil. Incoloy* Electrical Heating Element is available in 1250 Watts allowing hot water production when engine heat is not available. Heat...

RCM Dual Heating Water Heater Stainless Steel - 60 Litre. Incoloy Electric Element and Heat Exchanger Coil. Incoloy* Electrical Heating Element is available in 1250 Watts allowing hot water production when engine heat is not available. Heat...

RCM Dual Heating Water Heater Stainless Steel - 80 Litre. Incoloy Electric Element and Heat Exchanger Coil. Incoloy* Electrical Heating Element is available in 800 and 1200 Watts allowing hot water production when engine heat is not...

Electric Water Heater manaufactured by Whale. Features: 12V Power Supply - No generator / inverter/ shore power required Rapid Heat - Hot water in less than 1 hour - Heat up time 40°C in 41 minutes, 60°C in 80 minutes Heat...

Stainless Steel Slim Water Heaters manufactured by Isotherm. Smart finish in a brushed stainless steel exterior, the quality of the Isotemp Basic by Isotherm®, is not just skin deep. Optimal water heating is achieved in two ways, firstly by...

Pressure relief valve preset to 500kPa. Replacement hot water pressure relief valve to suit Isotemp water heaters. Threaded 1⁄2" BSP and preset to 500kPa. Requires 135730 and a 135734 if retro-fitting to existing systems...

Water Heater Hose Tail Kit manufactured by Isotherm. Set of five brass tails to provide connection of hoses from both engine cooling system and fresh water supply to Isotemp Slim and Basic water heaters. Kit includes 2 x 16mm barbed tails with...

Hot Water Heater Anode for ATI water heaters. 16mm x 240mm - M6X6

ATI Hot Water Heater with a painted aluminium outer and enamelled inner. Supplied with stainless steel mounting brackets. Dual heating - Incoloy Electric Element and Heat Exchanger Coil. Incoloy* Electrical Heating Element is available in 800 and...

This thermostat cuts off the electrical supply to the heater element as the preset temperature is achieved (temperature can be set between 0 degree celsius and 70 degree celsius). Suits ATI water heaters. Part numberMax Amps SAW-44299 20A

ATI Incoloy Electric Heating Element - 1250W This ATI electrical heater element allows water to be heated when the boat engine is off. Suits both Stainless Steel and Enamelled Tanks 1-1/4" BSP Part number Power Volts SAW-44297 1250W 230V

ATI Incoloy Electric Heating Element - 850W This ATI electrical heater element allows water to be heated when the boat engine is off. Suits both Stainless Steel and Enamelled Tanks Part number Power Volts SAW-44296 850W 230V

This ATI electrical heater element allows water to be heated when the boat engine is off. Suits both Stainless Steel and Enamelled Tanks Part numberPowerVolts SAW-44295 1200W 230V