-
Harken
Harken Rod Adaptor Studs
Harken Rod Adapter Studs. If fitting a Harken MKIV or ESP furling system to a boat with a rod forestay than a rod adapter will be required. Rod rigging must be cut and coldheaded by an authorized rod service center. Product CodeThread DiameterSuits...
-
Harken
Harken Unit 4 MKIV Foil Connector Set - 270mm, Fits -30, -40 Rod, 12mm Wire
Unit 4 MKIV HydraulicC-shaped open connectors with low-friction plastic isolators slip onto the headstay wire and into foil for easy installation.Length (mm)270mmrod ∅ (dash)-30, -40Rod ∅ (mm)11.1, 12.7mmWire ¶?? (1 x 19 SS) (mm)12mmUse with...
-
Harken
Harken 580mm Leg Toggle Kit - 22.2mm Pin
Medium and long leg kits raise the drum to clear the anchor, reduce sail chafe, and increase visibility. Removable clamp screws allow legs to pivot out of the way for easy access to the turnbuckle. Choose long or medium leg kits for furlers with...
-
Harken
Harken 580mm Leg Toggle Kit - 25.4mm Pin
Medium and long leg kits raise the drum to clear the anchor, reduce sail chafe, and increase visibility. Removable clamp screws allow legs to pivot out of the way for easy access to the turnbuckle. Choose long or medium leg kits for furlers with...
-
Harken
Harken 740mm Leg Kit Toggle - 22.2mm Pin
A long leg kit adjusts the drum height. Choose the long leg extension kit when using a turnbuckle with swage, Norseman or Sta-Lok terminals. Long legs raise the drum to clear the anchor, reduce sail chafe, and increase visibility. Removable clamp...
-
Harken
Harken 740mm Leg Kit Toggle - 25.4mm Pin
A long leg kit adjusts the drum height. Choose the long leg extension kit when using a turnbuckle with swage, Norseman or Sta-Lok terminals. Long legs raise the drum to clear the anchor, reduce sail chafe, and increase visibility. Removable clamp...
-
Harken
Harken 370mm Leg Kit Toggle - 22.2mm Pin
A short leg kit adjusts the drum height. Choose the short leg extension kit when the furler attaches directly to a marine eye at the bottom of the stay. Short legs allow the sail to be closer to the deck. Use without turnbuckle. Note: DO NOT use...
-
Harken
Harken 370mm Leg Kit Toggle - 25.4mm Pin
A short leg kit adjusts the drum height. Choose the short leg extension kit when the furler attaches directly to a marine eye at the bottom of the stay. Short legs allow the sail to be closer to the deck. Use without turnbuckle. Note: DO NOT use...
-
Harken
Harken Unit 3 ESP Foil Connector Set - 267mm
Tough foil joints withstand years of torque loading. Connector interlocks with foil and secures with screws and adhesive. No extra adhesive needed for a secure lock.Length (mm)267mmUse with furling unit7323.10
-
Harken
Harken Unit 3 ESP Foil - 2m
Round foil profile withstands extreme reefing loads for secure furling. Rolls more easily than flat foil shapes.Length (m)2mUse with furling unit7323.10DO NOT use Harken equipment for human suspension unless product is specifically certified and labeled...
-
Harken
Harken Unit 2 ESP Leg Kit - 470mm (Medium)
Medium and long leg kits raise the drum to clear the anchor, reduce sail chafe, and increase visibility. Removable clamp screws allow legs to pivot out of the way for easy access to the turnbuckle. Choose long or medium leg kits for furlers with...
-
Harken
Harken Unit 2 ESP Foil Connector Set - 241mm
Tough foil joints withstand years of torque loading. Connector interlocks with foil and secures with screws and adhesive. No extra adhesive needed for a secure lock.Length (mm)241mmUse with furling unit7322.10
-
Harken
Harken Unit 2 ESP Foil - 2 m
Round foil profile withstands extreme reefing loads for secure furling. Rolls more easily than flat foil shapes.Length (m)2mUse with furling unit7322.10DO NOT use Harken equipment for human suspension unless product is specifically certified and labeled...
-
Harken
Harken Unit 1 ESP - 320mm Leg Kit Toggle - 12.7mm Pin
Medium and long leg kits raise the drum to clear the anchor, reduce sail chafe, and increase visibility. Removable clamp screws allow legs to pivot out of the way for easy access to the turnbuckle. Choose long or medium leg kits for furlers with...
-
Harken
Harken Unit 1 ESP - 320mm Leg Kit Toggle - 11mm Pin
Medium and long leg kits raise the drum to clear the anchor, reduce sail chafe, and increase visibility. Removable clamp screws allow legs to pivot out of the way for easy access to the turnbuckle. Choose long or medium leg kits for furlers with...
-
Harken
Harken Unit 1 ESP - 450mm Leg Kit Toggle - 11mm Pin
A long leg kit adjusts the drum height. Choose the long leg extension kit when using a turnbuckle with swage, Norseman or Sta-Lok® terminals. Long legs raise the drum to clear the anchor, reduce sail chafe, and increase visibility. Removable...
-
Harken
Harken Unit 1 ESP - 450mm Leg Kit Toggle - 12.7mm Pin
A long leg kit adjusts the drum height. Choose the long leg extension kit when using a turnbuckle with swage, Norseman or Sta-Lok® terminals. Long legs raise the drum to clear the anchor, reduce sail chafe, and increase visibility. Removable...
-
Harken
Harken Unit 1 ESP - 230mm Leg Kit Toggle - 11mm Pin
A short leg kit adjusts the drum height. Choose the short leg extension kit when the furler attaches directly to a marine eye at the bottom of the stay. Short legs allow the sail to be closer to the deck. Use without turnbuckle. Note: DO NOT use...
-
Harken
Harken Unit 1 ESP - 230mm Leg Kit Toggle - 12.7mm Pin
A short leg kit adjusts the drum height. Choose the short leg extension kit when the furler attaches directly to a marine eye at the bottom of the stay. Short legs allow the sail to be closer to the deck. Use without turnbuckle. Note: DO NOT use...
-
Harken
Harken Unit 1 ESP - Unit 1 ESP Foil Connector Set - 229mm
Tough foil joints withstand years of torque loading. Connector interlocks with foil and secures with screws and adhesive. No extra adhesive needed for a secure lock. Part NumberLengthUse with Furling Unit HKN-7321.31 229mm 7321.10
Sailboat Fittings & Hardware
Sailboat fittings and hardware are the components that connect the sails, rigging, and other parts of the boat together. They are essential for the safe and efficient operation of a sailboat.
Some common sailboat fittings and hardware include:
- Blocks: Blocks are used to change the direction of a line, or to increase the mechanical advantage of a line. They are typically made of metal or plastic, and have a sheave (a grooved wheel) that the line runs through.
- Cleat: Cleats are used to secure lines to the boat. They come in a variety of shapes and sizes, and are typically made of metal or plastic.
- Thimbles: Thimbles are used to protect lines from chafing. They are typically made of metal or plastic, and have a hole through the center that the line runs through.
- Rigging: Rigging is the system of lines and poles that supports the sails and mast. It is typically made of high-strength wire rope or synthetic rope.
- Sail track: Sail track is a system of channels that the sails slide along. It is typically made of metal or plastic, and is attached to the deck of the boat.
- Cars: Cars are used to move the sails along the sail track. They are typically made of metal or plastic, and have wheels that roll along the track.
Sailboat fittings and hardware are an essential part of any sailboat. They are made from a variety of materials, and come in a variety of shapes and sizes. The type of fittings and hardware that are used on a sailboat will depend on the size and type of boat, as well as the intended use of the boat.
Here are some of the benefits of using high-quality sailboat fittings and hardware:
- Safety: High-quality fittings and hardware are less likely to fail, which can help to prevent accidents.
- Durability: High-quality fittings and hardware are more durable, and will last longer than lower-quality fittings.
- Performance: High-quality fittings and hardware can help to improve the performance of the boat.
If you are considering buying a sailboat, it is important to choose a boat that is equipped with high-quality fittings and hardware. This will help to ensure the safety, durability, and performance of your boat.