-
Harken
Harken 27mm Track Endstop Kit - Mast Groove, Fixed
Harken 27mm Track Endstop Kit - Mast Groove, Fixed Endstops absorb shock loads and prevent damage to the car. Kits include endstops, Loctite®, 2 slug mounts. Fasteners included. Download Manual for Battcars Built 2007 to...
-
Harken
Harken 27mm Flanged Track
Harken 27mm Flanged Track Belongs to Harken's 27mm B Battcar System. Track is extruded from high-grade 6061-T6 aluminium and hardcoat-anodised for a hard, long-lasting surface. Use flanged track when mounting to carbon spars. Track features a...
-
Harken
Harken 27mm Track Endstop Kit - Mast Groove, Pinstop
Harken 27mm Track Endstop Kit - Mast Groove, Pinstop Belongs to Harken's 27mm B Battcar System. Use pinstop endstop to easily remove cars and mainsail. Order one kit only. Not for flanged track. Fasteners are included. Download Manual...
-
Harken
Harken 27mm Track Mounting Kit - Mast Groove
Harken 27mm Track Mounting Kit - Mast Groove Mounting kit slugs are available for flat or round mast grooves. Order one kit per track section. Specifications Fasteners: M6 mm Mounting Slug Length: 22 mm Mounting Slugs per Kit: 19 Connector Slug...
-
Harken
Harken 27mm Slug-Mount Track
Harken 27mm Slug-Mount Track Belongs to Harken's 27mm B Battcar System. Track is extruded from high-grade 6061-T6 aluminium and hardcoat-anodised for a hard, long-lasting surface. 3844 track mounts to mast using a unique slug system that allows...
-
Harken
Harken Two-Speed Mainsheet Self-Contained System - 4 to 1, 8 to 1
Harken Two-Speed Mainsheet Self-Contained System - 4 to 1, 8 to 1 Harken® gross-trim/fine-tune mainsheet systems are easy to install and use. These optimised systems decrease overall line clutter because they use less line than traditional...
-
Harken
Harken 22mm CB Battcar - 10mm Stud
Harken 22mm CB Battcar - 10mm Stud A Harken Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded. Battcar systems outperform in-mast or in-boom furling, cost...
-
Harken
Harken 18mm T-Track Mounting Kit - Extras
Harken 18mm T-Track Mounting Kit - Groove Extras Mounting kit slugs are available for flat or round mast grooves. Order one kit per track section. Part NumberTypeMounting Slug LengthMounting Slugs Per UnitMounting Slug WeightFits Flat Mast Groove...
-
Harken
Harken 18mm T-Track Mounting Kit - Wide Flat Mast Groove
Harken 18mm T-Track Mounting Kit - Wide Flat Mast Groove Mounting kit slugs are available for flat or round mast grooves. Order one kit per track section. Part Number HKN-HC9108 Mounting slug length (mm) 19 mm Mounting...
-
Harken
Harken 27mm ESP High-Load Slider Car - Pinstop
Harken 27mm ESP High-Load Slider Car - Pinstop Use pinstop cars in applications where lead positions change infrequently. Pinstop and ball bearing genoa lead cars both run on ball bearing track, allowing you to upgrade your system without changing track...
-
Harken
Harken 13mm Slug-Mount Track
Harken 13mm Slug-Mount Track Belongs to Harken's 13mm AA Battcar System. Track is extruded from high-grade 6061-T6 aluminium and hardcoat-anodised for a hard, long-lasting surface. 3817 track mounts to mast using a unique slug system that allows...
-
Harken
Harken 27mm ESP Adjustable CB Car - 2 Sheave, 2 to 1
Harken 27mm ESP Adjustable CB Car - 2 Sheave, 2:1 CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead...
-
Harken
Harken 27mm Adjustable CB Car - 2 Sheave, 4 to 1
Harken 27mm Adjustable CB Car - 2 Sheave, 4:1 CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles...
-
Harken
Harken 27mm ESP High-Load Adjustable CB Car - Sheave, 2 to 1
Harken 27mm ESP High-Load Adjustable CB Car - Sheave, 2:1 CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing...
-
Harken
Harken 22mm CB Battcar - Intermediate
Harken 22mm CB Battcar - Intermediate A Harken Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded. Battcar systems outperform in-mast or in-boom furling, cost...
-
Harken
Harken 27mm ESP Adjustable CB Car - Sheave, 2 to 1
Harken 27mm ESP Adjustable CB Car - Sheave, 2:1 CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead...
-
Harken
Harken 22mm ESP Adjustable CB Car - Sheave, 2 to 1
Harken 22mm ESP Adjustable CB Car - Sheave, 2 to 1 CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead...
-
Harken
Harken 22mm CB Headboard Car Assembly
Harken 22mm CB Headboard Car Assembly A Harken Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded. Battcar systems outperform in-mast or in-boom furling, cost...
-
Harken
Harken Endstops - Low-Beam, Set of 2
Harken Endstops - Low-Beam, Set of 2 When end controls are not used, add endstops to absorb shock loads. Part Number Track Size Use with...
-
Harken
Harken 22mm Slug-Mount Track
Harken 22mm Slug-Mount Track Track is extruded from high-grade 6061-T6 aluminium and hardcoat-anodised for a hard, long-lasting surface. 3807 track mounts to mast using a unique slug system that allows mast-up installation. Download Instruction...
Sailboat Fittings & Hardware
Sailboat fittings and hardware are the components that connect the sails, rigging, and other parts of the boat together. They are essential for the safe and efficient operation of a sailboat.
Some common sailboat fittings and hardware include:
- Blocks: Blocks are used to change the direction of a line, or to increase the mechanical advantage of a line. They are typically made of metal or plastic, and have a sheave (a grooved wheel) that the line runs through.
- Cleat: Cleats are used to secure lines to the boat. They come in a variety of shapes and sizes, and are typically made of metal or plastic.
- Thimbles: Thimbles are used to protect lines from chafing. They are typically made of metal or plastic, and have a hole through the center that the line runs through.
- Rigging: Rigging is the system of lines and poles that supports the sails and mast. It is typically made of high-strength wire rope or synthetic rope.
- Sail track: Sail track is a system of channels that the sails slide along. It is typically made of metal or plastic, and is attached to the deck of the boat.
- Cars: Cars are used to move the sails along the sail track. They are typically made of metal or plastic, and have wheels that roll along the track.
Sailboat fittings and hardware are an essential part of any sailboat. They are made from a variety of materials, and come in a variety of shapes and sizes. The type of fittings and hardware that are used on a sailboat will depend on the size and type of boat, as well as the intended use of the boat.
Here are some of the benefits of using high-quality sailboat fittings and hardware:
- Safety: High-quality fittings and hardware are less likely to fail, which can help to prevent accidents.
- Durability: High-quality fittings and hardware are more durable, and will last longer than lower-quality fittings.
- Performance: High-quality fittings and hardware can help to improve the performance of the boat.
If you are considering buying a sailboat, it is important to choose a boat that is equipped with high-quality fittings and hardware. This will help to ensure the safety, durability, and performance of your boat.