-
Harken
Harken 40 mm Flip-Flop Block
Harken 40 mm Flip-Flop Block Small Boat Flip-Flop blocks pivot around the line axis to keep the line close to the deck. Hinged construction allows for various lead angles. Part Number HKN-2181 Sheave Ø (mm) 40...
-
Harken
Harken 57mm T2 Soft-Attach Ratchamatic Block - 1.5x Grip
Harken 57mm T2 Soft-Attach Ratchamatic Block - 1.5x Grip Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their...
-
Harken
Harken 29 mm Wire Bullet Block - Swivel
Harken 29 mm Wire Bullet Block - Swivel Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line...
-
Harken
Harken 1/4" Delrin Ball Bearing - 21 Balls
Harken 1/4" Delrin Ball Bearing - 21 Balls Delrin actal resin is a black material which excels in low to moderate-load applications. Part Number HKN-176 Ø (mm) 6 mm Ø (in) 1/4 in Weight (g) 14.18 g Weight...
-
Harken
Harken 27mm End Control - Double Sheave, Set of 2
High-performance end controls allow the installation of 2:1 to 4:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with Delrin® ball bearings let cars instantly adjust and release under load. Assemblies secure to...
-
Harken
Harken Aluminium Mastbase Block - 76mm
Harken Aluminium Mastbase Block - 76mm Low-profile mastbase halyard lead blocks are lightweight and can be grouped in a small area at the mastbase. Download Instruction Manual Part Number HKN-1990 Height (mm) 95...
-
Harken
Harken 150 Cam-Matic Cleat Rebuild Kit
Harken 150 Cam-Matic® Cleat Rebuild Kit - 1993 and Newer Kits include: cam caps, washers, Delrin® balls, torsion springs, baseplate, cam base and instructions. Cam cleats built before 1993 have different baseplates. Replace only balls, torsion...
-
Harken
Harken 5/16" Delrin Ball Bearing - 25 Balls
Harken 5/16" Delrin Ball Bearing - 25 Balls Delrin actal resin is a black material which excels in low to moderate-load applications. Part Number HKN-1583 Ø (mm) 8 mm Ø (in) 5/16 in Weight...
-
Harken
Harken Standard Cam-Matic Cleat - Double Springs
Harken Standard Cam-Matic® Cleat - Double - Springs Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous...
-
Harken
Harken 5/32" Delrin Ball Bearing - 66 Balls
Harken 5/32" Delrin Ball Bearings - 66 Balls This is a replacement ball kit for a Harken Cam-Matic® 150 cleat. Delrin actal resin is a black material which excels in low to moderate-load applications. Part...
-
Harken
Harken 51mm Aluminum Midrange Sheave
Harken 51mm Aluminum Midrange Sheave Self-contained sheaves are designed for sailors to use in custom applications. Midrange sheaves come in either Delrin® or aluminum for wire. Delrin® is a registered trademark of E. I. du Pont de Nemours and...
-
Harken
Harken Standard Cam-Matic Cleat - 150
Harken Standard Cam-Matic® Cleat - 150 Harken® ball bearing 150 cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment...
-
PSP Tapes
PSP Dacron Repair Patch 24cm x 37cm
Manufactured by PSP Marine Tapes in the UK. PSP's Dacron Repair Patch provides two strong sail cloth patches to apply to either side of a sail for larger repairs. Now also in a range of colours for repairs to covers, dodgers and spray...
-
PSP Tapes
PSP Dacron Wave Tape 75mm x 3m
Manufactured by PSP Marine Tapes in the UK. PSP's self adhesive Dacron cloth edging is designed to be applied to the leech of the mainsail to help reduce flutter and breakdown. The tape becomes waterproof once the adhesive has set,...
-
PSP Tapes
PSP Dacron Sail Tape 75mm x 1.5m
Manufactured by PSP Marine Tapes in the UK. PSP's Dacron Sail Tape is ideal for adding insignia or making repairs to high load areas of sails and covers. Part...
-
PSP Tapes
PSP Kite Repair Tape 150mm x 2.5m
Manufactured by PSP Marine Tapes in the UK, this tear resistant adhesive rip-stop nylon is available in an extensive range of colours and comes in a roll width of 150mm. It is perfect for the sailor or kitesurfer, who notices a small tear in their...
-
PSP Tapes
PSP Spinnaker Repair Tape 50mm x 4.5m
Manufactured by PSP Marine Tapes in the UK, PSP's Spinnaker Repair Tape is universally known for a fast effective repair. Available in a wide range of colours to suit virtually all spinnaker sails. Part...
-
PSP Tapes
PSP Waterproof Course Cards (15 pack)
Manufactured by PSP Marine Tapes in the UK, these waterproof sail course cards are perfect for recording race notes. Simply jot down the race course in the club house, remove the sticker from the backing paper and position on dinghy. Win the race then...
-
PSP Tapes
PSP Mainsail Tell Tale Strips (pack of 16)
Manufactured by PSP Marine Tapes in the UK, these sail tell-tale strips are perfect for main sail trimming. Similar to telltales fitted to genoa luffs the Main-Tales should be fitted at intervals along the leech of the mainsail so that you can...
-
PSP Tapes
PSP Clear Monster Tape 75mm x 1.5m
Manufactured by PSP Marine Tapes in the UK, Monster Tape is extremely strong, is waterproof, resistant to UV light, salt water and works comfortably at temperatures -40°C to 100°C. It has a high-performance adhesive on one side and can be...
Sailboat Fittings & Hardware
Sailboat fittings and hardware are the components that connect the sails, rigging, and other parts of the boat together. They are essential for the safe and efficient operation of a sailboat.
Some common sailboat fittings and hardware include:
- Blocks: Blocks are used to change the direction of a line, or to increase the mechanical advantage of a line. They are typically made of metal or plastic, and have a sheave (a grooved wheel) that the line runs through.
- Cleat: Cleats are used to secure lines to the boat. They come in a variety of shapes and sizes, and are typically made of metal or plastic.
- Thimbles: Thimbles are used to protect lines from chafing. They are typically made of metal or plastic, and have a hole through the center that the line runs through.
- Rigging: Rigging is the system of lines and poles that supports the sails and mast. It is typically made of high-strength wire rope or synthetic rope.
- Sail track: Sail track is a system of channels that the sails slide along. It is typically made of metal or plastic, and is attached to the deck of the boat.
- Cars: Cars are used to move the sails along the sail track. They are typically made of metal or plastic, and have wheels that roll along the track.
Sailboat fittings and hardware are an essential part of any sailboat. They are made from a variety of materials, and come in a variety of shapes and sizes. The type of fittings and hardware that are used on a sailboat will depend on the size and type of boat, as well as the intended use of the boat.
Here are some of the benefits of using high-quality sailboat fittings and hardware:
- Safety: High-quality fittings and hardware are less likely to fail, which can help to prevent accidents.
- Durability: High-quality fittings and hardware are more durable, and will last longer than lower-quality fittings.
- Performance: High-quality fittings and hardware can help to improve the performance of the boat.
If you are considering buying a sailboat, it is important to choose a boat that is equipped with high-quality fittings and hardware. This will help to ensure the safety, durability, and performance of your boat.