Inflatable Boats & Accessories

Allows you to move your boat across sand and all firm surfaces including the parking lot and boat ramps. All non-corrosive construction with self-lubricating wheels and no maintenance required. Retractable - locks in up or down position. Suitable for...

Majoni "Roll-A-Boat" boat rollers made in Holland from thick heavy duty PVC material. For moving boats across sand or beaches Etc. At least 2 rollers should be used, depending on the type, length and weight of the boat. 2 models are available that are...

Inflatable Boat Rollers - Medium Duty (450kg) For moving small dinghies across sand or beaches Etc. At least 2 rollers should be used, depending on the type, length and weight of the boat. 2 models are available that are suitable for a range of dinghies...

Inflatable Boat Rollers - Light Duty (200kg) For moving small dinghies across sand or beaches, etc. At least 2 rollers should be used, depending on the type, length and weight of the boat. 2 models are available that are suitable for a range of dinghies...

Majoni "Roll-A-Boat" boat rollers made in Holland from thick heavy duty PVC material. For moving boats across sand or beaches Etc. At least 2 rollers should be used, depending on the type, length and weight of the boat. 2 models are available that...

A simple and economical mover for small dinghies. Simply clamps on to the dinghy stern to move it to and from the water (upside down). Adjustable transom clamp with wide 160mm ABS wheels and double poly tyres for easier moving on sand. The frame is...

Bravo 1 foot pump is suitable for pool toys, air mats, etc. Single chamber with reinforced bellows. Glass filled nylon body. Anti-slip feet provides greater stability. Compact size makes them suitable for boats, life rafts, kayaks and SUPs. Inflates and...

The Bravo 10 Foot Pump is made from nylon reinforced fibreglass and features a double chamber system allowing for either high volume, low pressure (5 litre, 4.4 psi) or low volume, high pressure (1.6 Litre, 11.6 psi)  air-flow. Nylon reinforced...

This grey inflation/deflation valve suits inflatable tenders.  Screw Cap internal thread is 31.5mm Part numberHeightDiameter SAW-39158 40mm 63mm

Inflate/Deflate Valve for rubber inflatable boats. This valve features a seal system that remains under the closing cap and has a twisting button system. Push the green button and turn at 90 degrees for opening and closing.  Part...

Stainless steel R-clip to suit snap davits. Part numberLengthWidth SAW-39199 54mm 20mm

Adjustable davit stand-off bars manufactured from stainless steel. These davit stand-off bars have a snap hook at either end to allow for easy positioning between boat and tender. Part numberDiameterLength SAW-39198 22mm 450mm - 750mm

S/S "W" Bar Suits Snap Davit Part number SAW-39197

Snap Davit Platform Clip Assembly Mounting Holes: 7mm & 10mm Part numberLengthWidth SAW-39196 110mm 74mm

Grey rubber snap davit pad intended for Neoprene/Hypalon inflatables. Hypalon's resistance to UV & chemicals makes it an ideal material for inflatable boats. Typically used for higher-quality RIBs, Hypalon is less likely to suffer from wicking...

Inflatable Dinghy Snap Davit Quick Release Plates SS Pair Sold in pairs. Part number Length Width Mounting Holes SAW-39194 125mm 110mm 4 x 7.8mm on Each Plate

Grey Cleat Bollard for inflatable boats. Manufactured from PVC. Suitable for rope - 8mm - 12mm. Part numberLengthWidthHeightMaterialColour SAW-39140 240mm 192mm 70mm PVC Grey

  Pulley Bollard designed to be mounted to an inflatable boat / rib. This dual purpose fitting helps you to retrieve an anchor safely and also provides a convenient tie-on point for your tender. Can be used as a pulley or bollard for inflatable...

Rubber Handle Light Grey Manufactured in rubber material for inflatable boats. The handle can be utilized as a lifeline. Part numberHeightLengthWidth SAW-39120 45mm 230mm 95mm

Axle Repair Kit for dolly wheels. Refer to parts: Single Dolly Wheel Kit Dual Dolly Wheel Kit Part number SAW-39188