1-3/4" BSP Alloy Deck Filler
Alloy Deck filler bungs are designed to be welded, they have no pre-drilled holes. Supplied complete with rubber 'O' seals in the plug. PART NO. 29606 Cut Out Size: Collar: Flange:
| Part number | Description | Cut Out Size | Collar |
|---|---|---|---|
| SAW-29606 | 1 3/4 BSP Alloy Deck Filler | 62mm | 82mm |
This alloy deck filler has a 1-3/4 inch BSP thread and O-rings in the plug to give a good seal. It is designed to be welded in place. Spare plug. Part numberCutout neededCollarFastenings
Alloy Deck fillers bungs are designed to be welded, they have no pre-drilled holes. Supplied complete with rubber 'O' seals in the cap. Part numberDescriptionCut Out SizeCollarSAW-29612Deck Filler...
This plug is designed to fit the 1-3/4" BSP Weld In Deck Filler Part NumberThread Dia.Flange Outside Dia. SAW-29605 53.5mm 64mm
1-3/4" BSP Alloy Deck Filler Cap Part numberDescription SAW-29607 1 3/4 BSP Alloy Cap
Deck Filler Replacement BSP Caps 316G stainless steel. O-ring seal. Cap retainer chain Made in China Please Note: Key is not included. Part numberSuits Filler SizeTo Suit...
Alloy Weld In Sender Flange - 1-1/4" BSP Thread T6063 Alloy Note: Special sizes available to order. Length is measured from underside of the flange to the base of the shaft. Part...
Perko
Deck filler by Perko with a chrome plated zinc alloy base. Fitted with black plastic mount flange with raised lip and cap with securing strap. Cap flange has “gas” identification...
1-1/2" BSP Replacement Alloy Flange Base. Part Number SAW-29600F
316 stainless steel deck wash outlet with a BSP thread and 130 degree angled adaptor. Flush mount. Connects and disconnects under full pressure. Positive lock bayonet connector. Adaptor -...
