CHRISTMAS & NEW YEAR BUSINESS HOURS
Thank you for your continued support & partnership with The Boat Warehouse. We wish you a safe and relaxing holiday period.
Please note that orders placed after Wednesday December 11th may not arrive in time for Christmas.
The Boat Warehouse will be closed from 4:00pm on Tuesday December 24th and will re-open at 9:00am on Monday January 6th 2025.
No on-line orders will be shipped during this period.
VETUS Round Air Suction Vent Type 110 with Stainless Steel (AISI316) Grille and Synthetic Housing
This air suction vent is made of stainless-steel (AISI 316). The synthetic rotating connector is meant to function as a watertight dorade box, we do not supply a matching hose.
This vent is suitable for up to 16 hp of engine power. Therefore, for a 60 hp engine, 4 of these air suction vents must be fitted (2 x to port and 2 x to starboard).
| Part Number | Free Flow Area |
|---|---|
| VTS-ERV110A | 0.66dm2 |
Vetus
Vetus Louvered Air Suction Vent A marine diesel engine needs sufficient air in order to function correctly. The volume of combustion air required is approximately 6.1m³ per kW (4.5 m³ per hp) per...
Vetus
VETUS Dorade box for air suction vent In addition to combustion air, the engine also requires sufficient ventilation air to dissipate the residual heat. The required volume of ventilation air is...
Vetus
Vetus Rectangular Louvered Air Suction Vent A marine diesel engine needs sufficient air in order to function correctly. The volume of combustion air required is approximately 6.1m³ per kW (4.5 m³...
Vetus
VETUS Louvred Air Suction Vent AISI 316 The SSVL frame and grilles are made of high gloss polished stainless steel. Model number relates to the engine horsepower for which it is suitable...
Vetus
VETUS Louvred Air Suction Vent AISI 316/Aluminium SSV Frame is made of high gloss stainless steel and grilles of naturally anodised aluminium. Model number relates to the engine horsepower for...
Vetus
Stylish 316 stainless steel cowl vents finished with a red interior from Vetus. Both the cowls and rings are made of cast stainless steel (AISI 316). The cowls rotate and are removable and the...
Vetus
Duplex 1-4462 stainless steel propeller shaft. This shaft is machined with 1:10 taper and a keyway as standard. It is supplied with key and propeller nut with integrated zinc anode. The dimensions...
Used where permanent ventilation is required. Low profile. 304G Stainless Steel Part numberDiameterProtrusionMount Screws SAW-30510 100mm 3mm 2.5mm c/s SAW-30515 130m
Louvre Vent - Stainless Steel Round Pressed stainless steel round vent with raised louvres. Surface mount. Part Number Diameter Protrusion Mount...