BEP Tank Level Monitor Sender Interface Module
The 600-TLM-SIF signal converter module is used to convert from 10-180 ohm, or 240-33 ohm tank sender outputs, to a 0-5V output. BEP equipment that uses a 0-5 volt signal input includes the DCSM DC/Systems Monitor, CZone Digital Switching/Monitoring, and the 600-TLM tank monitor.
| Part Number | BEP Part No. | BLA Part No. |
|---|---|---|
| BEP-327019 | 600-TLM-SIF | 113396 |
BEP Marine
BEP Ultrasonic Tank Sender - Unprogrammed TS1 is an advanced tank sender based on ultrasonic measurement technology. Handles common outputs - 240-33ohm, 10-180ohm, Vetus 10-300ohm for analog...
Blue Sea Systems
Blue Sea Vessel Systems Monitor Tank Sender - Gas Only Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800—can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc...
Blue Sea Systems
Blue Sea Vessel Systems Monitor Tank Sender - Diesel, Water, Waste Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800—can be precisely calibrated for each tank* Reliable - SSI...
Sender waste tank Matro toilet control switch points 170/60mm. Part Number SAW-453098
Alloy weld-on or screw-in adapter for tanks with 5 holes tapped with a metric thread. The holes do not go all the way through. This sender adapter converts tanks with 5-hole fittings for 1-1/4" BSP...
BEP Marine
BEP Circuit Breaker Module The 707 Circuit Breaker Module offers provision for three circuit breakers ideal for medium duty loads, like waste treatment systems and electric toilets. It is designed...
Nuova Rade
RWB8920 to 8923 suit waste tank use. All suit both 12v and 24v systems and are supplied with wiring, gasket and stainless steel fastenings. American Standard 240-33 ohms (240 ohms at empty, 33 ohms...
BEP Marine
BEP Panel Mounted DC Systems Monitor The Contour Digital Monitor offers a comprehensive range of functions to allow full monitoring of your batteries and charging systems. Monitors voltage on up to...