Blue Sea ATD Automatic Timer Disconnect
Can be configured to be used as one of the following battery saving products
Timer Disconnect
- 12V signal triggers relay to connect battery power to devices
- When signal is removed the timer is activated and will disconnect devices after a preset time
- Timer ranges from 15 minutes to 4 hours
Low Voltage Disconnect
- 12V signal triggers relay to connect battery power to devices.
- After 12V signal is removed, device senses low battery voltage and automatically disconnects devices.
- Low voltage setting can be used in conjunction with Timer Disconnect. Low voltage will disconnect devices prior to preset time to preserve battery power
Automatic Charging Relay
- Automatically combines two batteries when charging, and isolates them when discharging
- Single side sensing design only monitors the voltage of the start battery
- Ideal for auxiliary batteries that are AGM or significantly larger than the start battery
Solenoid
- 12V signal will connect or disconnect relay without any time delay
| Part Number | Nominal Voltage | Amp Operating Current | Terminal Stud Torque | Cable Size to Meet Ratings | Charge Sense Connect | Charge Sense Disconnect | Disconnect Time | Input Voltage Range | Low Voltage Disconnect | Max Cable Size | Stud Material | Terminal Ring Diameter Clearance | Terminal Stud Size | Overvoltage Lockout | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BSS-7615 | 12V DC | 175mA (closed) 4mA (open) |
140 in-lb (15.82 Nm) | 1 AWG (50mm²) | 13.0V (3 sec) | 12.75V (10 sec) | 5 sec, 15 min, 30 min, 1 hr, 1.5 hr, 2hr, or 4hr | 9.5-16V | 11.0V (10 sec) 11.5V (10 sec) 12.0V (10 sec) |
1/0 AWG (50mm²) | Tinned Copper | 28.45mm | 3/8"-16 (M10) | 16.0V (5 sec) | 0.57kg |
