Utilising a magnetic field to control the reed on-off switch, the sender features a long service life and protection against vibration.
Compatible with Fuel Gauges with a 240-33 Ohms resistance.
- American Standard 240-33 ohms (240 ohms at empty, 33 ohms at full)
- 5 SAE standard holes.
- 316G stainless steel main body.
- Rubber gasket provides a liquid tight seal.
- IP67 rated.
- Operating temperature: -40°C - +85°C.
- 300mm tinned wire with a PVC material cover.
- Stainless steel screws included.
- 33mm float cut out.
- Metal Cap Diameter: 70mm
- Internal Diameter inside screw holes: 38mm
Note:
- Length is measured from the underside of the flange to the base of the shaft.
- Be sure to select a matching gauge marked 240-33 Ohms to work with this fuel sender.
- Tank sender should be slightly shorter than the depth of the tank.
Part number | Length |
---|---|
SAW-40134 | 100mm |
SAW-40135 | 110mm |
SAW-40136 | 120mm |
SAW-40140 | 140mm |
SAW-40150 | 150mm |
SAW-40175 | 175mm |
SAW-40180 | 180mm |
SAW-40195 | 195mm |
SAW-40200 | 200mm |
SAW-40220 | 220mm |
SAW-40225 | 225mm |
SAW-40235 | 235mm |
SAW-40240 | 240mm |
SAW-40250 | 250mm |
SAW-40265 | 265mm |
SAW-40275 | 275mm |
SAW-40280 | 280mm |
SAW-40300 | 300mm |
SAW-40325 | 325mm |
SAW-40335 | 335mm |
SAW-40350 | 350mm |
SAW-40375 | 375mm |
SAW-40400 | 400mm |
SAW-40425 | 425mm |
SAW-40450 | 450mm |
SAW-40500 | 500mm |
SAW-40600 | 600mm |