These Sensotex senders fit a 1-1/4" BSP thread and change resistance between 0-180 Ohms. Two lengths are available and a rubber gasket is included.
Note that length is measured from the underside of the flange to the base of the shaft.
| Part number | Length |
|---|---|
| SAW-43600 | 600mm |
| SAW-431100 | 1100mm |
Sam Allen
Waste tank sender unit with a 1-1/4" BSP thread, 800mm long. 0-180 OHMS 316G stainless steel Rubber gasket and stainless steel screws included Part...
KUS Gauges
KUS senders fit a 1-1/4" BSP thread and change resistance between 240-33 Ohms. Multiple lengths are available and a rubber gasket is included. American Standard 240-33 ohms (240 ohms at empty,...
Sam Allen
Waste tank sender unit with a 1-1/4" BSP thread, 250mm long. American Standard 240-33 ohms (240 ohms at empty, 33 ohms at full) 316G stainless steel Rubber gasket and stainless steel screws...
Veethree’s reed switch sender is compatible with a variety of fuel and fluid types, including; gasoline, diesel, hydraulic fluids, black water and grey water. The reed switch sender unit provides...
Simarine
Simarine Tank Sender 1-1/4" BSP 240-33OHMS Part NumberLength SIM-EN-TS100 100mm SIM-EN-TS150 150mm SIM-EN-TS175 175mm SIM-EN-TS200 200mm SIM-EN-TS225 225mm
KUS Gauges
Utilising a magnetic field to control the reed on-off switch, the sender features a long service life and protection against vibration. Compatible with Fuel Gauges with a 240-33 Ohms resistance...
Alloy Weld In Sender Flange - 1-1/4" BSP Thread T6063 Alloy Note: Special sizes available to order. Length is measured from underside of the flange to the base of the shaft. Part...
Simarine
Simarine Stainless Steel Weld Flange for 1-1/4" BSP Part NumberWeightOverall Diameter SIM-EN-TS-FL-SS-BSP 0.2kg 54mm
Sender unit adapter made from stainless steel. This weld-in bush suits 1-1/4" BSP thread senders.