Victron GX LTE 4G Modem & GPS Accessory for GX Devices

The GX LTE 4G is an accessory for GX devices. It is a cellular modem that supports 2G, 3G and 4G technologies. It provides mobile internet for the system and a connection to the Victron Remote Management (VRM) portal.

Features:

• Built-in GPS receiver The GX LTE 4G includes a built-in GPS receiver. When the optional active GPS antenna is installed, the system can be tracked as well as geo-fenced on the VRM Portal. The required accessory part number is GSM900200100 - Active GPS Antenna for GX GSM.
• GX compatibility The GX LTE 4G can be used with any of the GX devices and requires Venus OS v2.60 or newer to be installed on the GX device.
• SIM card It requires a SIM card of the Mini-SIM format

Installation Step-by-step:

• Mount the device in a place that is not covered by metal objects. Consider using the optional outdoor antenna when installing the GX LTE 4G in a closed metal enclosure, car, or van to increase the range.
• Mount the included antenna to the SMA connector labeled LTE.
• An optional active GPS antenna is screwed onto the SMA connector labeled GPS.
• Insert the SIM card. You will need to eject the SIM card tray with a pen or other pointy object. Be aware that the SIM card tray sits slightly recessed inside the unit. Be sure to push it all the way in.
• Connect the GX LTE 4G to the GX device with the supplied USB cable. Use a USB hub if all USB sockets are already in use.
• Connect the DC power supply (8 to 70 VDC). A 1.4 m cable with M10 cable lugs and a built-in Slow Blow fuse 3.15A 250V, 5x20mm is included. Pay attention to the correct polarity as labeled on the front sticker.
• After power-up, the blue LED will be solid blue. Once it has registered on a network, the LED will start blinking slowly. Finally, when the internet connection is established, the LED will blink quickly.

In the Box:

• GX LTE 4G (with integrated USB cable)
• GSM 2G/3G/4G mini rod antenna (for indoor use)
• DC power cable (with inline fuse and terminal block)