Fusion^® Apollo^™ Marine Amplifier - 4 Channel (150W RMS per Channel)

It's the difference between hearing the music and feeling it. This 4 channel amplifier with 150-watt RMS per channel can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.

Features

• Keep the music going for longer without draining your battery as quickly
• No more manual adjustments to your audio settings - the Easy Tune feature automatically regulates audio settings so you can get the best quality sound
• Identify electrical issues at a glance - indicator lights will show you issues with electrical currents and shorts as well as temperature.
• Some amplifiers distort audio when they add power - this is specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes
• Don't worry about potential overheating damage with this ignition protection design
• The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements
• The amplifiers are designed to last season after season and have been tested to a high level of protection against salt fog, temperature, vibration and UV
• You can connect up to two speakers per channel, increasing set-up options
• The Apollo amplifiers are designed to produce impressive power with less drain on your battery - the 4 channel amplifier produces 150-watt RMS per channel

Included: 1 x mounting bracket, 1 x power connector, 2 x speaker connectors with high power mode adaptors, 4 x 8-gauge flathead self-tapping screws, 4 x 8-gauge panhead self-tapping screws for mounting cover, 4 x screw covers, mounting template, installation instructions, and important safety and product information

Specifications

• Water rating: IPX2
• Amplifier class: Class-D
• CEA-2006 power rating: 150 watt RMS x 4 @ 14.4 V input - 4 ohm < 1% THD
• Total rated power output: 290 watt RMS x 4 @ 14.4 V input - 2 ohm < 1% THD / 580 watt RMS x 2 @ 14.4 V input - 4 ohm Bridged < 1% THD
• Input sensitivity: 1.6 V RMS
• Input impedance: 22k ohm
• Operating voltage: 10.8 V - 16 V DC
• Power-cable fuse or circuit breaker rating (not included): 40 A
• Operating temperature range: 0° to 50° C
• 3 year warranty

*Note: Amplifiers are designed exclusively for use with Fusion DSP-enabled stereos (Apollo RA770, Apollow RA670, Apollo WB670 and RA210) and Fusion speakers. Futher, the Easy Tune feature requires setup using the Fusion^® Audio app on a compatible smartphone