Raymarine iTC-5 Instrument Transducer Converter
The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkng.
- Transducers for Speed/Temperature, Depth, Wind, Rudder Angle can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.
- Extended STng systems can support multiple iTC-5 units.
- SeaTalkng connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkng backbone.
Please Note: The ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5.Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass). If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers
Transducer Connections:
- Red - Speed and sea temperature transducer connection
- Orange - Wind transducer and rotavecta connection
- Please Note: Yellow - Fluxgate Compass is now a retired product
- Green - Rudder reference transducer connection
- Blue - Depth transducer connection
- SeaTalkng backbone connection
- SeaTalkng spur connection
- Sea Talkng backbone connection
| Part Number | Nominal supply voltage | Operating voltage range | Current | Power consumption |
|---|---|---|---|---|
| RAY-E70010 | 12 V DC | 9 - 16 V DC | <150 mA peak operating current | Typical: 1.5W |
