This best performing dual channel chirp (low/high) 1 kW thru-hull transducer, this mount performs well in deep water and has exceptional bottom and water column detail. This transducer has a depth...

This mid-range 1 kW 8-pin transducer with a narrow beam is good for deep water and bottom definition. It has a depth of 1,500 to 2,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of...

Part Number GMN-010-12568-22   Step up to 1 kW without a fairing block with this flush-mounted stainless steel housing that protrudes less than 1/4-inch outside the...

This best performing dual channel chirp (low/med) 1 kW thru-hull transducer, this bare wire mount performs well in deep water and has exceptional bottom and water column detail. This transducer has...

This plastic thru-hull mount transducer with fairing block uses the low frequencies for deep water performance and high wide frequencies for shallow water performance. A 2 kW in a slightly smaller...

Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted...

This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This 8-pin 500 W transducer has a depth of 900 ft; an operating...

This bronze thru-hull mount transducer is designed to allow both traditional and spread spectrum scanning when used with a compatible sonar. Depth and temperature transducer.  A 600 W...

This stainless steel 600 W 8-pin transducer provides a vertical beam without a fairing and is excellent for fiberglass and wood hulls. It has a depth of 800 to 1,200 ft; an operating frequency of 50...