Humminbird Cable Transducer Splitter - Helix Left/Right
Splitter Cable allows for installation of separate left and right Side Imaging transducers to be connected to one Humminbird unit, without the need for a transducer switch
Compatible Units
Please Note: *Compatible with models that utilize 455kHz/800kHz, MEGA Imaging and MEGA Imaging+ frequencies
| Part Number |
|---|
| HUM-103653 |
Humminbird
Humminbird Cable Transducer Splitter - Mega 360 Helix Mega+ Part Number HUM-103657
Humminbird
Humminbird Cable Transducer Splitter - Helix SI/Dual Beam Splitter cable allows both a Side Imaging and a 2D transducer to be connected to one Humminbird unit for high speed depth tracking with a...
Humminbird
Humminbird Cable Transducer Splitter SI & DB APEX SOLIX Part Number HUM-103069
Humminbird
Humminbird Cable Transducer Splitter - Mega 360 Solix G2 G3 Mega 360 plugs directly into your transducer port. If you are running another transducer into that unit you will need the below splitter...
Humminbird
Humminbird Cable Transducer Splitter SI LFT & RGT APEX SOLIX The 14 M ID SIDB Y cable allows for the installation of a separate 2D transducer paired with a Humminbird MEGA Imaging or...
Humminbird
Humminbird Cable Transducer Extension 3M & 9M Helix and Legasy 7 PIN 3m & 9m extension cable for 7-pin transducers for models of the HELIX family and other Humminbird Legacy models...
Humminbird
In Hull Dual Spectrum CHIRP 2D Sonar with high frequency beam and wide cone angle, offering CHIRP range of 150-220kHz and max depth of 1200ft. For use in single layer fiberglass hull. No...
Humminbird
Humminbird Transducer Bracket Transom MSI + HELIX/SOLIX Transom Mounting Hardware & Adaptors Mhx Xm Hw Trans Transom Hardware MSI + Helix Solix MEGA Imaging+ MetalMounting...
Humminbird
Humminbird Cable Transducer Extension Solix Apex 3M &10M Compatible with: APEX, SOLIX and ONIX Series Can be used in coordination with MKR MI-1 (HELIX 8-12) and MKR MDI-2 (HELIX 7) to extend...