Turning Point Hustler 3 Blade Aluminium Propeller only - LE1/LE2 Model. Note that a Turning Point propeller hub kit needs to be purchased separately to the propeller.
Turning Point has built their reputation on a relentless focus on engineering the best performing aluminium propellers in the World. Utilising state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as some Stainless Steel Props, and sometimes faster!
Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup give an incredible package - Stainless Performance at Aluminium Prices! Hustler propellers are the only aluminium propeller manufactured with performance enhancing vent holes (selected models only 13” & 14” diameter 15 + Pitch). If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.
The Three Blade Hustler is great for boaters looking to get the most top-end out of their boat and offer excellent bow lifting capabilities.
Choosing your Turning Point propeller is a two-step process:
- This propeller suits the motors listed below. If your motor is not listed, see other Turning Point propellers.
- Purchase the associated Hub Installation Kit which should suit the drive shaft on your outboard
| Part Number | Pitch | Diameter | Model # |
|---|---|---|---|
| TPT-202335 | 11" | 14" | LE1/LE2-1411 |
| TPT-202337 | 13" | 14" | LE1/LE2-1413 |
| TPT-202321 | 15" | 13.75" | LE1/LE2-1315 |
| TPT-202322 | 17" | 13.25" | LE1/LE2-1317 |
| TPT-202329 | 19" | 13.25" | LE1/LE2-1319 |
| TPT-202333 | 21" | 13.25" | LE1/LE2-1321 |
NOTE - PROPELLER HUB KIT IS SOLD SEPARATELY. SEE TABLE BELOW.
This propeller is compatible with the following outboard motors:
| Manufacturer | Suits Model | Splines | Hub Kit Selection |
|---|---|---|---|
| Parsun | T60, T75, T85, T90 | 15 | 500 Hub Kit |
| Yamaha | High Thrust: FT50, FT60 / 2 stroke: 60 to 100hp / 4 stroke: 70, 80, 90 ('03-'16), 100hp. If prop strikes trim tab, replace with Yamaha part #6E5-45371-10 |
15 | 500 Hub Kit |
| Force | 75hp ('99) / 90hp to 150hp ('95+) | 15 | 501 Hub Kit |
| Honda | ('95-'98): 75hp, 90hp | 15 | 501 Hub Kit |
| Mercury & Mariner | 2 & 4 stroke) 40 to 60 Bigfoot / 70 (‘87-’89) / 75, 80 (‘78-’89), 90, 100, 115, 125, 140hp / 150 XR4/6 (thru 1993, includes equivalent Mariner Magnum I, II, III.) EFI CT & SeaPro 4cyl: 40 to 75hp / OptiMax: 75, 90, 115, 125hp |
15 | 501 Hub Kit |
| Suzuki & Johnson | DF 4 stroke: 50AV, 60AV, 115A, 140, 140A | use 4 blade props only | 501 Hub Kit |
| Evinrude & Johnson | 2 cyl: 50hp ('71-'74) / 45 to 55hp commercial 3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial 4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140 ('77-'84, '86-'94) / H.O. (includes E-TEC H.O.): 60, 90, 115hp E-TEC: 40, 50, 60, 65, 75hp / 20” shaft: 90, 115hp (not pontoon series), 130hp ('09-'10) |
13 | 503 Hub Kit |
| OMC | Cobra 400: 2.3 to 3.0L ('78-'89) / Sea Drive: 1.6 to 1.8L | 13 | 503 Hub Kit |
| Nissan & Tohatsu | 60C, 70C / 90 to 140hp(not BFT) | 15 | 505 Hub Kit |
| Yamaha | 2 stroke: 115 to 130hp / 4 stroke: 90 ('17+), 115hp. Note: If prop strikes trim tab, replace with Yamaha part #6E5-45371-10 |
15 | 505 Hub Kit |
| Evinrude & Johnson | 4 stroke: 60hp, 70hp | 13 | 506 Hub Kit |
| Suzuki | DT 2 Stroke ('89+): 75 to 140hp / DF 4 Stroke ('98-'09): 60hp, 70hp | 13 | 506 Hub Kit |
| Honda | P60 / 75, 90 (‘99+) / 100, 115, 130hp. (not 115D) | 15 | 507 Hub Kit |
| Nissan & Tohatsu | BFT (‘14+): W60, 60, 75, 90hp | 15 | 507 Hub Kit |
| Suzuki & Johnson | 4 stroke: (‘09+) 70A, 80A, 90A, 70, 80 / (‘01+) 90, 100, 115 (Not 115A) | Use 4 blade props only | 509 Hub Kit |
