TURNING POINT MASTERGUARD PROPELLER HUB FOR 40-150HP / 90-300+HP OUTBOARD MOTORS WITH A 4.25" / 4.75" GEARCASE (507 KIT)
500 Series Installation Kits. The Turning Point Masterguard Propeller Hub System enables the end-user to economically carry a spare or different diameter/pitch propeller to suit the days skiing, fishing or cruising activities.
The MasterGuard Hub design utilises shock and vibration absorbing polymers for unmatched dependability.
- Lifetime warranty for engines under 200hp.
- Premium corrosion-resistant brass splines.
- Eliminate hub system vibration & chatter.
- Reduce gear shock & engine/drive damage.
- Reduce prop replacement cost by up to 50%
NOTE: Not applicable with Turning Point’s 10, 20 and 200 Hub Kit series.
NOTE: **Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty.
Choosing your Turning Point propeller is a two-step process:
- Select the Installation Kit to suit the drive shaft on your outboard. Check the table below for your engine model. If not listed, then see other Turning Point hub kits.
- Choose the:
- Turning Point Aluminium 3 Blade Hustler propeller LE Model for (90-300+HP) or, 3 Blade LE1/LE2 Model for (40-150HP)
- Turning Point Aluminium 4 Blade Hustler propeller LE Model for (90-300+HP) or, 4 Blade LE1/LE2 Model for (40-150HP)
- Turning Point Mach3 Express 3 Blade Stainless Steel propeller EX Model for (90-300HP) or, 3 Blade EX1/EX2 Model for (40-150HP)
- Turning Point Mach4 Express 4 Blade Stainless Steel propeller EX Model for (90-300HP) or, 4 Blade EX1/EX2 Model for (40-150HP)
- Turning Point Mach3 OS Express 3 Blade Stainless Steel propeller to these hub kits (all sold separately)
| Manufacturer | Splines | Suits Model | Suits Engines | Notes |
|---|---|---|---|---|
| Honda | 15 | P60 / 75, 90 (‘99+) / 100, 115, 130hp. (not 115D) | 40-150HP with 4.25" Gearcase | |
| Nissan & Tohatsu | 15 | BFT (‘14+): W60, 60, 75, 90hp | 40-150HP with 4.25" Gearcase | |
| Honda | 15 | BF115D, BF135, BF150, BF200 ('02-'12), BF225 ('02-'12) | 90-300+HP with 4.75" Gearcase | Use 707 Super Duty Kit for 200+hp Engines. |
| Suzuki | 15 | DT 2 stroke: 150hp to 225hp. DF 4 stroke: 150 to 300hp | 90-300+HP with 4.75" Gearcase | Use 707 Super Duty Kit for 200+hp Engines. Use Express Mach3 OS series props only. |
