TURNING POINT MASTERGUARD PROPELLER HUB FOR 40-150HP / 90-300+HP OUTBOARD MOTORS WITH A 4.25" / 4.75" GEARCASE (505 KIT)
500 Series Installation Kits. The Turning Point Masterguard Propeller Hub System enables the end-user to economically carry a spare or different diameter/pitch propeller to suit the days skiing, fishing or cruising activities.
The MasterGuard Hub design utilises shock and vibration absorbing polymers for unmatched dependability.
- Lifetime warranty for engines under 200hp.
- Premium corrosion-resistant brass splines.
- Eliminate hub system vibration & chatter.
- Reduce gear shock & engine/drive damage.
- Reduce prop replacement cost by up to 50%
NOTE: Not applicable with Turning Point’s 10, 20 and 200 Hub Kit series.
NOTE: **Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty.
Choosing your Turning Point propeller is a two-step process:
- Select the Installation Kit to suit the drive shaft on your outboard. Check the table below for your engine model. If not listed, then see other Turning Point hub kits.
- Choose the:
- Turning Point Aluminium 3 Blade Hustler propeller LE Model for (90-300+HP) or, 3 Blade LE1/LE2 Model for (40-150HP)
- Turning Point Aluminium 4 Blade Hustler propeller LE Model for (90-300+HP) or, 4 Blade LE1/LE2 Model for (40-150HP)
- Turning Point Mach3 Express 3 Blade Stainless Steel propeller EX Model for (90-300HP) or, 3 Blade EX1/EX2 Model for (40-150HP)
- Turning Point Mach4 Express 4 Blade Stainless Steel propeller EX Model for (90-300HP) or, 4 Blade EX1/EX2 Model for (40-150HP)
- Turning Point Mach3 OS Express 3 Blade Stainless Steel propeller to these hub kits (all sold separately)
| Manufacturer | Splines | Suits Model | Suits Engines | Notes |
|---|---|---|---|---|
| Nissan & Tohatsu | 15 | 60C, 70C / 90 to 140hp (not BFT) | 40-150HP with 4.25" Gearcase | |
| Yamaha | 15 | 2 stroke: 115 to 130hp / 4 stroke: 90 ('17+), 115hp | 40-150HP with 4.25" Gearcase | If prop strikes trim tab, replace with Yamaha part #6E5-45371-10 |
| Yamaha | 15 | 90-300+HP with 4.75" Gearcase | Use 705 Super Duty Kit for 200+hp Engines. If Express Mach3 OS Prop strikes trim tab, replace with part #6E5-45371-10-00. |
