Vetus Drive for Propeller Shaft - Type 6, Constant‐Velocity Joint 30.
The VETUS DRIVE (Type VDR) is a combination of a self-aligning thrust bearing and a double acting constant velocity joint. The propeller thrust is absorbed by the inbuilt thrust bearing allowing the engine to be set up on softer mountings, resulting in lower vibration and transmitted noise.
The VDR is made of stainless, black passivated steel and high performance rubber. This heavy duty VDR has been tested under the toughest conditions and is suitable for maximum thrust up to 24 000 N.
Specifications:
- VDR6 is available for shaft diameters of 50, 60 or 70 mm
- VDR2 and 4 are available for shaft diameters of 25, 30, 35, 40, 45 or 50 mm
- Interchangeable with other well-known models
- Durable design with long lifetime
| Part Number | Shaft Diameter / Flange | Overall Length (A) | B | Flange Height (C) | Diameter (D) | Clamp Width (E) | F | Thrust Width (G) | H | I |
|---|---|---|---|---|---|---|---|---|---|---|
| VTS-VDR630505 | 50mm / 5" | 522mm | 333mm | 127mm | 87.5mm | 87.5mm | 250mm | 87mm | 50mm | 250mm |
| VTS-VDR630506 | 50mm / 6" | 522mm | 333mm | 152.4mm | 87.5mm | 87.5mm | 250mm | 87mm | 50mm | 250mm |
| VTS-VDR630605 | 60mm / 5" | 522mm | 333mm | 127mm | 87.5mm | 87.5mm | 250mm | 87mm | 60mm | 250mm |
| VTS-VDR630606 | 60mm / 6" | 522mm | 333mm | 152.4mm | 87.5mm | 87.5mm | 250mm | 87mm | 60mm | 250mm |
| VTS-VDR630705 | 70mm / 5" | 522mm | 333mm | 127mm | 87.5mm | 87.5mm | 250mm | 87mm | 70mm | 250mm |
| VTS-VDR630706 | 70mm / 6" | 522mm | 333mm | 152.4mm | 87.5mm | 87.5mm | 250mm | 87mm | 70mm | 250mm |
