These centrifugal blowers, manufactured by Laguna Marine, are designed for flange mounting. They are made from tough fibreglass with stainless steel shaft and screws and have a low current draw. These blowers can be used to move air in many places, including engine compartments, bilges, galleys and head closets.
Duty cycle: 6 hours max. on, 30 mins off cool down.
CE Certified, Ignition Protected ISO 8849, EN 55014, ISO 10133.
Fastenings not included.
| Part number | Voltage | Capacity | Current | Outlet Diameter | L x W x H |
|---|---|---|---|---|---|
| SAW-39700 | 12V | 280m3/h (163ft3/min) | 3.9A | 72mm | 200mm x 165mm x 195mm |
| SAW-39702 | 24V | 280m3/h (163ft3/min) | 2.5A | 72mm | 200mm x 165mm x 195mm |
| SAW-39704 | 12V | 500m3/h (324ft3/min) | 11.5A | 103mm | 290mm x 257mm x 150mm |
| SAW-39706 | 24V | 500m3/h (324ft3/min) | 7A | 103mm | 290mm x 257mm x 150mm |
| SAW-39708 | 12V | 750m3/h (441ft3/min) | 19A | 103mm | 290mm x 257mm x 150mm |
| SAW-39710 | 24V | 750m3/h (441ft3/min) | 11A | 103mm | 290mm x 257mm x 150mm |
| SAW-39712 | 24V | 1000m3/h (589ft3/min) | 16A | 103mm | 290mm x 257mm x 180mm |
