Laguna Marine Flex Mount Blowers come in 12 and 24 volts, ranging from 324 to 589 cubic feet per minute designed for ventilating engine compartments, bilges, galleys and head closets. Made from strong fibreglass material with screws and shaft in stainless steel. Low current draw.
These centrifugal blowers, manufactured by Laguna Marine, are designed for flex mounting - the mounting bracket can be relocated around the shell to allow for holding from different sides of the blower.
They are made from tough fibreglass with stainless steel shaft and screws and have a low current draw. These blowers can be used to move air in many places, including engine compartments, bilges, galleys and head closets.
- Duty cycle: 6 hours max. on, 30 mins off cool down.
- CE Certified, Ignition Protected ISO 8849, EN 55014, ISO 10133.
- Fastenings not included.
| Part number | Voltage | Capacity | Current | Inlet Diameter | Outlet Diameter | Width | Length | Height |
|---|---|---|---|---|---|---|---|---|
| SAW-39714 | 12V | 500m3/h (324ft3/min) | 11.5A | 100mm | 103mm | 257mm | 290mm | |
| SAW-39716 | 24V | 500m3/h (324ft3/min) | 7.0A | 100mm | 103mm | 257mm | 290mm | |
| SAW-39718 | 12V | 750m3/h (441ft3/min) | 19.0A | 150mm | 103mm | 257mm | 290mm | |
| SAW-39720 | 24V | 750m3/h (441ft3/min) | 11.0A | 150mm | 103mm | 257mm | 290mm | |
| SAW-39722 | 24V | 1000m3/h (589ft3/min) | 16.0A | 150mm | 103mm | 257mm | 290mm |
