Vetus Rigid Waste Water Tank, Including Connections 25L, 40L, 60L & 80L
Save time on your 'black tank' installation with the VETUS Rigid Waste Water Tank, which is supplied with the following connections:
- Fixed hose connector 19mm diameter for the breather line.
- Rotating hose connector 38mm diameter with pick-up pipe, for waste water suction.
A 42mm diameter hole is provided for easy installation of an inlet fitting, type RT.B. This should be ordered separately according to the inlet hose diameter. If required, additional inlet fittings may also be installed. The Rigid Waste Water Tank comes complete with a pre-fitted inspection lid and is made in accordance with ISO 8099 standards.
The VETUS waste water tank is made from high-grade linear polythene and is designed to be odour-free when used for the temporary storage of organic waste materials (suited for both 'black' and 'grey' water). The centre point for an SAE flange gauge sender is incorporated in the moulding together with five blind bolt holes. The relevant gauge sender should be ordered separately and the appropriate hole cut in the tank. Further extras include a discharge pump and the WWCP waste management panel.
NOTE: Dimensions are tank Only.
| Part Number | Liter Capacity | Dimensions (H x W x L) |
|---|---|---|
| VTS-BTANK25C | 25L | 32cm x 30cm x 43cm |
| VTS-BTANK40C | 40L | 37.3cm x 36.2cm x 47.2cm |
| VTS-BTANK60C | 60L | 37.3cm x 36.2cm x 68.2cm |
| VTS-BTANK80C | 80L | 37.3cm x 36.2cm x 89.2cm |
