ATI Hot Water Heater with a painted aluminium outer and enamelled inner.
Supplied with stainless steel mounting brackets.
- Dual heating - Incoloy Electric Element and Heat Exchanger Coil.
- Incoloy* Electrical Heating Element is available in 800 and 1200 Watts allowing hot water production when engine heat is not available.
- Heat Exchanger Coil features a large surface area designed to generate a large output of hot water.
- Insulation uses closed cell expanded polyurethane foam (HFC, CFC, HCFC and HFA free).
- Enamelled steel tank is internally coated according to DIN 4753.**
- Replaceable Magnesium anode is fitted to all Enamelled Steel units to protect against galvanic corrosion.
- External casing is made of pre-painted aluminium, chosen because of its suitability for marine applications
- Adjustable safety thermostat.
- Pressure relief and non-return valve.
- Power cable supplied.
- Purpose built from high-quality materials for the marine environment:
- Enamelled Steel Tank: internally coated according to DIN 4753.
- External Casing: Pre-Painted Aluminium.
- Mounting Brackets: AISI 304 Stainless Steel.
- CE Certified EN 60335.
NOTE: This item may be supplied with a 2-pronged European plug. The plug should be removed and the ATI water heaters should be wired in to a junction box by a licenced electrician/installer at the time of installation.
| Part number | Capacity | Element | Volts | Overall Length | Width | Height |
|---|---|---|---|---|---|---|
| SAW-44230 | 22 Litres | 800W | 230V | 490mm | 322mm | 334mm |
| SAW-44232 | 30 Litres | 800W | 230V | 625mm | 322mm | 334mm |
| SAW-44234 | 45 Litres | 1200W | 230V | 885mm | 322mm | 334mm |
| SAW-44236 | 60 Litres | 1200W | 230V | 1080mm | 322mm | 334mm |
| SAW-44238 | 80 Litres | 1200W | 230V | 1285mm | 322mm | 334mm |
