Ram Mounts

Medium sized aqua box for mp3 player, phone or small PDA (XDA Mini, iPod, My-Fi, Creative, Dell etc). Power, earphone and accessory cables are routed through a patent pending, self draining baffle...

The RAM Mount Medium-Wide Aqua Box is designed to hold a large number of medium size devices. Made from high strength composite, the Aqua Box 6 holder is a medium/wide size waterproof box with a...

Mount can rotate 360 degrees, as well as tilt forward and back. Note: Supplied with Mount Only Part Number RAM-109H-PV2

The RAM-B-126 consists of a glare shield clamp base, double socket arm and 7" x 14" mirror. This mount is designed to mount to the lip edge of a flat surface up to 5/8" thick. The base has two...

RAM Mounts Mount Hummingbird Piranha Plates and arm to suit the following fish finder models: Piranha MAX 20, MAX 15 and MAX 10. It was also fit the Eagle Cuda 240i, 240, 168 and 128. Note:...

The RAM-114-NBU, high strength composite fishing rod holder and 6" spline post, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod...

This base has a socket for the RAM Rod 2000 arm at 90 degrees to the base plate. If you require a vertical mount, consider the RAM-114-BM Part Number RAM-114FMU

Ram 1" Base for Humminbird & Apelco 97 Swivel Mount Matrix and 500 Series Note: Supplied with Mount Only Part Number RAM-B-107BU

The RAM adapter base includes a 1.5" diameter rubber ball and inserts directly to the back of Lowrance Elite 5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing...

Base, arm, and screw mount to suit the Garmin GPSMAP 600 series of GPS. The standard cables can remain attached with the use of this suction mount. Part Number RAM-B-139-G4U

Plate, ball and clamp system for large universal mounting with standard neck. 25mm rubberized ball. Cast-aluminium.   Part Number RAM-B-111U

RAM Mounts Rectangular Base Short Clamp 1.5" ball with 2" X 6.25" plate and B size arm. Matches most Garmin marine units, and other devices. Part Number RAM-111U-B

RAM Mounts Rectangular Plate 2.25" Ball A rectangular aluminium plate, with 2.25" ball on top. The plate is 27.9cm x 7.6cm. Part Number RAM-D-111BU

RAM Mounts Rectangular Plate - 3" x 11" The RAM-137BU, universal mounting plate, consists of a 1.5" diameter rubber ball, connected at right angles to a flat 3" x 11"...

Plate and ball (rectangular) for clamp system, 25mm rubberized ball. Cast-aluminium. Note: Supplied with Plate Only Part Number RAM-B-111BU

The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the...

RAM Mounts Rectangular Plate Standard Ball. 1.5" ball on a 2" x 6 1/4" plate. The plate has holes that match the Garmin brackets for their smaller marine units. Can also be used with...

The RAM-114FMT RAM Flush Mount Base is a great way to put a patented RAM Ball Base on your boat, Kayak, or Water Craft. Designed to accommodate gunwales up to two inches thick, and seat with no...

Integrating two sought after features into a single system makes this new Rod Holder versatile to the extreme. Offering not only the patented RAM Rubber Ball and Socket Feature, but a ratcheting...

RAM Rod Holders are the culmination of superior design and materials resulting in the success of recreational and tournament fisherman alike. Comprised of ultra-durable composites, stainless...