Quattro QuicKEY – Ultra tough, quick-release design for off-road trailers
The patented Quattro QuicKEY is the convenient, quick-release caravan mover you can remove for travelling and the ‘go to’ solution for super-tough off-roading, providing maximum ground clearance while keeping the movers out of harm’s way.
Removed in seconds take your QuicKEY set-up with you, or simply leave them at home.
Replacing the movers is just as easy: slip them on, insert the pin and plug them in for safe, effortless manoeuvring. As with all Quattro models, QuicKEY movers are easy to fit. And, if your payload is limited, Quattro QuicKEY keeps on-board weight to a minimum.
All hardware and electrical components are supplied along with a detailed User Manual.
Safety Features
- Isolation switch fitted to prevent accidental use of the remote
- Unique double press ‘on’ button on the handset to prevent accidental operation
- Control unit and handset will shut down automatically after 60 seconds if the handset is not used in that time
- Control unit will shut down if the mover is working constantly in one direction for 3 minutes
- Built in motor overload protection (current and temperature) – no requirement for a fuse
- Automatically brakes immediately as soon as the handset button is released
Features
- Precision cast 130mm aluminium rollers
- Max Speed: 12cm/s
- Powerful motor and custom gearbox for efficient power transfer
- Easy-to-use cordless remote
- 2-year Warranty
Contents
- Wireless control module & instructions
- Frame mount brackets
- 2 or 4 x Powerful Quattro motors with precision gearboxes (quantity depends on model selected)
- Wiring & heat shrink
- Miscellaneous mounting hardware required for installation on most vans
| Part Number | Axles | Motors | Voltage | Average Current Consumption | Max Current Consumption | Total Weight | Safe Working Load |
|---|---|---|---|---|---|---|---|
| PPL-EQR130-S | Single Axle | 2 | 12 Volt DC | 25 Amps approx | 120 Amps approx | 37kg approx | 2250kg (or up to 1.5 tonnes on a 25% incline) |
| PPL-EQR130-T | Twin Axle | 4 | 12 Volt DC | TBA | TBA | TBA | 3000kg (or up to 2.5 tonnes on a 20% incline) |
Note - Information supplied as a guide only. Documentation supplied with the product overrides any information supplied here.
Frequently Asked Questions
Is the Quattro suitable for tough Australian road conditions?
Yes, each Quattro is a sealed, anodised, alloy unit that is very tough and rugged, ideally suited to the demands of outback Australian roads.
Will the Quattro fit my caravan?
Yes, adapter plates are available to ensure that the Quattro fits all chassis types as long as the ground clearance is a minimum of 165mm – the Quattro will drop down approximately 50mm from the chassis. Please contact us for further information.
Will the Quattro fit on twin axle caravans?
The Quattro is suitable for single and twin axle caravans.
Can I fit the Quattro myself?
Please review the installation instructions supplied with the product which will help you to decide if self-fit is an option for you. Alternatively, please contact your dealer or a mobile fitter.
Does the Quattro have soft start and stop?
It has precision control operation and provides excellent accuracy.
Where is the best location for the mover?
The best location for most Quattro movers is in front of the axle. However, if this is not possible it is usually possible to fit behind the axle.
Does it fit on a caravan with shock absorbers?
Yes.
