White registration letters 100mm (4") in height.
- Self-adhesive
- Sold in single letters or numbers only - most boats require two of each number or letter (one for each side of the hull).
- NOTE - the actual font of letters/numbers supplied may differ slightly from the image here. If this is a concern please contact us.
Boat registrations must be displayed clearly in all Australian states. They must be clearly visible and in a contrasting colour to the hull. Check your state's regulations with regards to the height of the lettering required for your particular vessel.
Installation Tips
- Arrange the letters and numbers on a clean, dry flat surface, with the colour facing up.
- Use a straight edge to align them.
- Double check that you have them in the correct order.
- Run two strips of electrical tape across the face of the letters to lock them in position.
- Flip the rego over and peel off the backing paper.
- Apply the rego stickers to the boat - they should retain the correct spacing and alignment.
- Press firmly to adhere the lettering to the boat fully.
- Gently remove the electrical tape.
| Part Number | Letter |
|---|---|
| TBW-REGO100WAEA | A |
| TBW-REGO100WBEA | B |
| TBW-REGO100WCEA | C |
| TBW-REGO100WDEA | D |
| TBW-REGO100WEEA | E |
| TBW-REGO100WFEA | F |
| TBW-REGO100WGEA | G |
| TBW-REGO100WHEA | H |
| TBW-REGO100WIEA | I |
| TBW-REGO100WJEA | J |
| TBW-REGO100WKEA | K |
| TBW-REGO100WLEA | L |
| TBW-REGO100WMEA | M |
| TBW-REGO100WNEA | N |
| TBW-REGO100WOEA | O |
| TBW-REGO100WPEA | P |
| TBW-REGO100WQEA | Q |
| TBW-REGO100WREA | R |
| TBW-REGO100WSEA | S |
| TBW-REGO100WTEA | T |
| TBW-REGO100WUEA | U |
| TBW-REGO100WVEA | V |
| TBW-REGO100WWEA | W |
| TBW-REGO100WXEA | X |
| TBW-REGO100WYEA | Y |
| TBW-REGO100WZEA | Z |
 - White")
 - Black")
