 - Black")
 - Black")
Black registration letters 150mm (6") in height.
- Self-adhesive
- Sold in single letters or numbers only - most boats require two of each number or letter (one for each side of the hull).
- NOTE - the actual font of letters/numbers supplied may differ slightly from the image here. If this is a concern please contact us.
Boat registrations must be displayed clearly in all Australian states. They must be clearly visible and in a contrasting colour to the hull. Check your state's regulation with regards to the height of the lettering required for your particular vessel.
Installation Tips
- Arrange the letters and numbers on a clean, dry flat surface, with the colour facing up.
- Use a straight edge to align them.
- Double check that you have them in the correct order.
- Run two strips of electrical tape across the face of the letters to lock them in position.
- Flip the rego over and peel off the backing paper.
- Apply the rego stickers to the boat - they should retain the correct spacing and alignment.
- Press firmly to adhere the lettering to the boat fully.
- Gently remove the electrical tape.
| Part Number | Letter |
|---|---|
| TBW-MLD-54600AEA | A |
| TBW-MLD-54600BEA | B |
| TBW-MLD-54600CEA | C |
| TBW-MLD-54600DEA | D |
| TBW-MLD-54600EEA | E |
| TBW-MLD-54600FEA | F |
| TBW-MLD-54600GEA | G |
| TBW-MLD-54600HEA | H |
| TBW-MLD-54600IEA | I |
| TBW-MLD-54600JEA | J |
| TBW-MLD-54600KEA | K |
| TBW-MLD-54600LEA | L |
| TBW-MLD-54600MEA | M |
| TBW-MLD-54600NEA | N |
| TBW-MLD-54600OEA | O |
| TBW-MLD-54600PEA | P |
| TBW-MLD-54600QEA | Q |
| TBW-MLD-54600REA | R |
| TBW-MLD-54600SEA | S |
| TBW-MLD-54600TEA | T |
| TBW-MLD-54600UEA | U |
| TBW-MLD-54600VEA | V |
| TBW-MLD-54600WEA | W |
| TBW-MLD-54600XEA | X |
| TBW-MLD-54600YEA | Y |
| TBW-MLD-54600ZEA | Z |
 - White")
