 - White")
 - White")
White registration letters 150mm (6") in height.
- Self-adhesive
- Sold in single letters or numbers only - most boats require two of each number or letter (one for each side of the hull).
- NOTE - the actual font of letters/numbers supplied may differ slightly from the image here. If this is a concern please contact us.
Boat registrations must be displayed clearly in all Australian states. They must be clearly visible and in a contrasting colour to the hull. Check your state's regulations with regards to the height of the lettering required for your particular vessel.
Installation Tips
- Arrange the letters and numbers on a clean, dry flat surface, with the colour facing up.
- Use a straight edge to align them.
- Double check that you have them in the correct order.
- Run two strips of electrical tape across the face of the letters to lock them in position.
- Flip the rego over and peel off the backing paper.
- Apply the rego stickers to the boat - they should retain the correct spacing and alignment.
- Press firmly to adhere the lettering to the boat fully.
- Gently remove the electrical tape.
| Part Number | Letter |
|---|---|
| TBW-MLD-54610AEA | A |
| TBW-MLD-54610BEA | B |
| TBW-MLD-54610CEA | C |
| TBW-MLD-54610DEA | D |
| TBW-MLD-54610EEA | E |
| TBW-MLD-54610FEA | F |
| TBW-MLD-54610GEA | G |
| TBW-MLD-54610HEA | H |
| TBW-MLD-54610IEA | I |
| TBW-MLD-54610JEA | J |
| TBW-MLD-54610KEA | K |
| TBW-MLD-54610LEA | L |
| TBW-MLD-54610MEA | M |
| TBW-MLD-54610NEA | N |
| TBW-MLD-54610OEA | O |
| TBW-MLD-54610PEA | P |
| TBW-MLD-54610QEA | Q |
| TBW-MLD-54610REA | R |
| TBW-MLD-54610SEA | S |
| TBW-MLD-54610TEA | T |
| TBW-MLD-54610UEA | U |
| TBW-MLD-54610VEA | V |
| TBW-MLD-54610WEA | W |
| TBW-MLD-54610XEA | X |
| TBW-MLD-54610AYEA | Y |
| TBW-MLD-54610AZEA | Z |
 - Black")
