Black registration numbers 100mm (4") in height.
- Self-adhesive
- Sold in single letters or numbers only - most boats require two of each number or letter (one for each side of the hull).
- NOTE - the actual font of letters/numbers supplied may differ slightly from the image here. If this is a concern please contact us.
Boat registrations must be displayed clearly in all Australian states. They must be clearly visible and in a contrasting colour to the hull. Check your state's regulations with regards to the height of the lettering required for your particular vessel.
Installation Tips
- Arrange the letters and numbers on a clean, dry flat surface, with the colour facing up.
- Use a straight edge to align them.
- Double check that you have them in the correct order.
- Run two strips of electrical tape across the face of the letters to lock them in position.
- Flip the rego over and peel off the backing paper.
- Apply the rego stickers to the boat - they should retain the correct spacing and alignment.
- Press firmly to adhere the lettering to the boat fully.
- Gently remove the electrical tape.
| Part Number | Number |
|---|---|
| TBW-MLD-544000EA | 0 |
| TBW-MLD-544001EA | 1 |
| TBW-MLD-544002EA | 2 |
| TBW-MLD-544003EA | 3 |
| TBW-MLD-544004EA | 4 |
| TBW-MLD-544005EA | 5 |
| TBW-MLD-544006EA | 6 |
| TBW-MLD-544007EA | 7 |
| TBW-MLD-544008EA | 8 |
| TBW-MLD-544009EA | 9 |
 - Black")
 - White")