Harken Furling Tack Adapter Tang - 5mm
Stainless steel tack adapter tangs are used to adapt pin diameters on headstays to the standard clevis pin size that comes on the Harken Small Boat underdeck furling unit. A third hole accepts lashing to adjust jib luff tension.
Part Number | HKN-480 |
Length (mm) | 65 mm |
Length (in) | 2 9/16 in |
Width (mm) | 57 mm |
Width (in) | 2 1/4 in |
Weight (g) | 147 g |
Weight (oz) | 5.2 oz |
Maximum working load (kg) | 1361 kg |
Maximum working load (lb) | 3000 lb |
Use with furling unit | 478 |
Tang hole to tang hole length (mm) | 38 mm |
Tang hole to tang hole length (in) | 1 1/2 in |
Maximum luff wire Ø (mm) | 5 mm |
Maximum luff wire Ø (in) | 3/16 in |
Upper pin Ø (mm) | 10 mm |
Upper pin Ø (in) | 3/8 in |
Lower pin Ø (mm) | 11 mm |
Lower pin Ø (in) | 7/16 in |