Ronstan Leech Batten Tension Adjuster
Suitable for keelboats, dinghies, and trailerable yacht applications.
Note: Product images used are indicative and products may differ slightly depending on size.
| Part Number | Suits Battens Up To | Weight |
|---|---|---|
| RON-PNP286 | 10.5mm x 7mm | 14g |
| RON-PNP287 | 16.0mm x 7mm | 24g |
| RON-PNP289 | 20.0mm x 10mm | 68g |
Ronstan
Ronstan Vernier Batten Adjuster - 22 x 10mm Vernier batten adjusters allow fine tuning of batten compression. Low gearing of the vernier screw permits fingertip adjustment, and precise settings are...
Ronstan
Ronstan Vernier Batten Adjuster - 30 x 10mm Vernier batten adjusters allow fine tuning of batten compression. Low gearing of the vernier screw permits fingertip adjustment, and precise settings are...
Ronstan
Ronstan Leech Tails (Set of 3) Essential guide for proper sail trim. Adhesive patches to ensure permanent bond with sail. High resolution fabric tails for maximum visibility. Part...
Ronstan
Ronstan Series 8 Ballside Car - Batten. Patented system uses low profile cars running on twin races of Torlon® ball bearings. Cars use the existing luff groove of the mast (no track or installation...
Ronstan
Patented system uses low profile cars running on twin races of acetal ball bearings. Cars use the existing luff groove of the mast (no track or installation work required). Ball bearings are captive...
Ronstan
Ronstan Batten Pocket End - 5 x 50mm Batten pocket end which suits battens up to 50mm (2") x 5mm (3/16"). Slot at the luff end allows attachment by webbing to slides, slugs or cars. Suitable for...
