Ronstan Series 22 Traveller Car with 4 Control Sheaves with Cleat (Long)
Mainsheet Series 22 traveller car featuring two control sheaves to allow for a 3:1 control system. Low profile with lightweight allow car bodies.
Twin rows of recirculating Torlon® ball bearings provide smooth, low friction performance under load. Individual cleat supports on mainsheet car can be adjusted to optimum cleating angle.
Car bodies are machined to precise specifications, then honed to an exceptional finish before being treated and anodised for maximum corrosion protection. Stainless steel elements are put through a special high energy finish process to achieve a uniquely smooth edge and surface finish.
Ball bearing upgrade sheave available seperately.
Materials
- Car bodies: alloy
- Ball bearings: Torlon®
- Sheaves: acetal (all purpose)
- Fixtures: grade 316 stainless steel
Applications
- This product is ideally suited for use on Monohulls under 10m/33ft in length
- The angle of the C-Cleats on the car is adjustable thanks to a series of holes in the cleat plate, allowing sailors to optimize the system for their cockpit and preferred trimming location
- Can be used with Stand-Up Spring Kit RON-RF324-1, which suits both Series 60 and Series 75 Core Blocks™
- Ideally paired with RON-RC12285 control ends and RON-RC1220 track
- If cleats are not required, use RC12213
- Can be used on curved tracks with a Minimum Horizontal "A" Bend of 9000 mm or a Minimum Horizontal "B" Bend Radius of 13000 mm
| Part Number | Car Length | Width | Quantity Balls | Weight | BL | MWL |
|---|---|---|---|---|---|---|
| RON-RC12223 | 180mm | 58mm | 110 | 930g | 2180kg | 880kg |
