Vetus Self-aligning Inner Bearing & Triple Shaft Seal - For Extra Security. ZWBH seals are developed for use with water lubricated stern gear. This updated monoblock design works in the same way...

This Vetus propeller shaft seal with inner bearing has a double shaft casing. To ensure a complete seal: The propeller shaft must have a maximum diameter-tolerance of + 0.0mm / - 0.16 mm the shaft...

Dual station units type DS; Type DS combines the action of a single lever control from either of 2 command stations, providing a single output to the engine throttle or gearbox lever. 2 Dual station...

Vetus Spare Zinc Anode for Shaft Nut. Note - Anode only. Propeller and other items pictured are not included. Part NumberShaft...

Self aligning anchors are best suited to sand and mud bottoms. Self aligning anchors roll upright, irrespective of initial drop altitude, within two shank lengths of engaging the seabed. High...

Combines the action of the single lever control from either of two command stations and provides a single output to the gearbox lever. This unit combines the action of the single lever control from...

Lowrance Inner Shaft 1 x Column, inner, 47" Part Number LOW-000-15239-001

VETUS Bronze Propeller Part Number Suitable for VTS-BP1182 BOW310HM VTS-BP1259 BOW410HM

Vetus Sound Insulation Self-Adhesive Tape (30m x 50mm Roll) Self-adhesive tape to provide a neat and professional finish when installing any sound deadening plate, use these self-adhesive tapes to...