SeaStar Filler Kit
Provides simple no-spill visible filling and purging of SeaStar helms. Contains a clear piece of hose fitted with a cap one end to screw directly on to a one litre oil container, a 3⁄8" NPT hose tail to screw into the helm and a push pin to start oil flow. Just attach, invert oil bottle and pierce base of oil container to start the flow.
| Part Number |
|---|
| BLA-291898 |
SeaStar
SeaStar Vented Filler Plug Vented filler plugs are supplied as standard with all SeaStar helms (not capilano). They suit single station installations and the top station in twin station...
SeaStar
SeaStar Non-Vented Filler Plug Non-vented filler plugs are required for the lower station of twin station installations. Part Number BLA-291914
SeaStar
SeaStar Slide Kit Slide kit to suit 291002 old front mount cylinder. * Please note, this is a special order item and can take 6-8 weeks for delivery. Part number: BLA-293700 Kit...
SeaStar
SeaStar Spacer Kit Includes a selection of spacers, washer and bolt to enable the 291003 front mount pivot cylinder to fit different outboard brands and models. Part...
SeaStar
SeaStar Solutions Bulkhead Pigtail Kit - SS Seastar A chromed stainless steel plate with strain relief fittings used to pass Hydraulic steering lines (not included) through a bulkhead without the...
SeaStar
SeaStar Solutions Hose Kit For SeaStar Cylinders - 3/8" Fitting kit to connect 3⁄8" diameter copper tubing to SeaStar cylinders. Part Number BLA-293202 Kit...
SeaStar
SeaStar Recessed Mount Kit Round recessed mounting kit to suit SeaStar front mount helms. Designed to reduce the distance that the helm protrudes from the dash. Supplied with mount...
SeaStar
SeaStar Jackplate Mount Kits. Part Number Size BLA-201884 63mm x 12mm BLA-201886 89mm x 12mm BLA-201890 114mm x...
SeaStar
SeaStar Back Plate Kit Square bezel to suit SeaStar or SeaStar Pro front mount helms. Reduces the distance the helm protrudes by thickness of dash. Also used to retro-fit new helms into...
