SeaStar Solutions Stainless Steel Spherical Rod Ends Stainless steel construction with Teflon bearing for optimum smooth operation, even under severe marine conditions. Surface hardened stainless...

SeaStar Solutions Rod End Kit - Zinc Plated Steel Comes as zinc plated ball joints with stainless steel fastenings. Part Number BLA-280560

SeaStar Solutions Mounting Kit - Transom Support - Stainless Steel These cable connections are used for older model outboards without tilt tubes, low HP outboards or installations where transom...

SeaStar Solutions Support Tube - Stainless Steel 7⁄8" (23mm) x 268mm tube to be used in conjunction with clamp blocks. One end is threaded to accept steering cable mount nut. Supplied with grease...

SeaStar Solutions Clamp Block - Outboard - Stainless Steel Stands off transom 125mm. Pressed metal clamp plates. Supplied with 6mm x 63mm mount bolts. Part Number BLA-280535

SeaStar Solutions Grease Wipe End Boot Replacement grease wipe end boot to suit 7⁄8" tilt tubes. Part Number BLA-280576

SeaStar Solutions Bulkhead Pigtail Kit - SS Seastar A chromed stainless steel plate with strain relief fittings used to pass Hydraulic steering lines (not included) through a bulkhead without the...

SeaStar Solutions Cable Clamps - Stainless Steel - Cable Series 33 Used to fasten the outer casing of 33 series control cables with clamp type hubs. Manufactured of stainless steel. Part...

SeaStar Solutions Ball Joint - Stainless Steel - 25mm with M8 Thread Connect 63 series control cables to throttle, gear or actuator linkage. Available in stainless steel. A spring loaded ball...