The Standard Mount Trim Tab is perfect for boats with a standard or high transom requiring a maximum height of 14" (356mm) to mount the actuator.
Standard Mount Trim Tab Kits featuring trim tabs with a matte finish.
Kit includes:
- 2 x Standard Mount Plates, 12 Gauge (2.7mm) - 304G stainless steel with a 5/8" flared trailing edge and 1/8" diameter hinge pin.
- 2 x 12V 101 actuators with 1.8m cable and Deutsch connectors.
- 2 x actuator extension wiring harness (6m) with Deutsch connectors.
- 1 x set of stainless steel fasteners.
- 2 x upper mounting brackets with gland seal.
- 2 x lower mounting brackets.
- Lenco owner’s installation manual.
- 5 Year Warranty (Recreational Use).
Note:
- Switch kit not included.
- Minimum transom height required for mounting is 356mm.
| Part number | Approx Boat Length | Trim Tab Length (L) | Trim Tab Width (W) | Hinge Height |
|---|---|---|---|---|
| SAW-55430 | 4.3 to 5.5m | 9" (228mm) | 9" (228mm) | 51mm |
| SAW-55432 | 4.9 to 7.6m | 9" (228mm) | 12" (305mm) | 51mm |
| SAW-55434 | 6.7 to 9.2m | 9" (228mm) | 18" (457mm) | 51mm |
| SAW-55436 | 7.9 to 12.2m | 9" (228mm) | 24" (610mm) | 25mm |
| SAW-55440 | 5.2 to 9.2m | 12" (305mm) | 12" (305mm) | 51mm |
| SAW-55442 | 7.9 to 11.0m | 12" (305mm) | 18" (457mm) | 51mm |
| SAW-55444 | 9.1 to 13.4m | 12" (305mm) | 24" (610mm) | 25mm |
